The Shacman X5000 Window Glass is a complete OEM-grade cab glazing system engineered for Shacman X5000 trucks. This comprehensive assembly ensures clear visibility, weather sealing, and structural integrity. The kit includes every essential component: Windshield Sealing Strip, Windshield/With Printed Antenna, Left Side Wall Window Assembly, Left Side Window Glass Sealing, Left Side Window Trim Strip, Rear Window Glass, Rear Window Glass Sealing Strip, Cross Slotted Screw And Washer, Right Side Wall Window Assembly, Right Side Window Trim Strip. Every part is precision-manufactured from automotive-grade glass and EPDM rubber for perfect fit and long-term durability. Upgrade your X5000 with the authentic Shacman X5000 Window Glass system and enjoy clear, safe views in all weather conditions.
Engineered with printed antenna integration and multi-layer sealing technology, the Shacman X5000 Window Glass system reduces wind noise and prevents water leaks. Restore factory visibility and comfort with genuine Shacman components.
One-piece EPDM rubber seal for windshield perimeter. Prevents water, dust, and wind intrusion. Designed with hollow bulb compression section for consistent sealing force.
UV and ozone resistant. Self-locating design for proper alignment. Direct replacement for worn or cracked original seals.
Laminated safety glass windshield with integrated printed antenna for AM/FM and GPS reception. Curved to X5000 cab profile. Green tint for UV reduction.
Includes black printed ceramic frit around edges. Meets ECE R43 and DOT safety standards. Direct OEM replacement.
Complete left side window assembly for sleeper cab. Tempered glass with mounting frame. Provides light and ventilation for resting area.
Includes integrated latch mechanism. Opens outward for fresh air flow. Direct replacement for damaged side windows.
Primary seal for left side window. EPDM rubber construction with multi-lip design. Prevents water ingress around moving glass.
Compression set resistant. Retains flexibility from -40°C to +90°C. Direct fit for X5000 left side window channel.
Decorative trim strip that covers the seal edge on left side window. Black PVC with chrome insert. Enhances exterior appearance.
Snap-on installation over seal lip. Protects seal from UV damage. Matches OEM styling.
Tempered safety glass for cab rear window (two units). Provides rearward visibility. Green tinted with black border frit.
Heat-strengthened for impact resistance. 4.85mm thickness. Direct replacement for cracked or fogged rear windows.
Two rubber sealing strips for rear window installation. EPDM material with lock-in profile. Provides watertight seal around rear glass.
Includes corner molding for consistent fit. Resists aging and cracking. Essential for leak-free rear window.
Pre-assembled cross slotted screws with captive washers for securing window trim and frames. M6x16mm size. Zinc-plated for corrosion resistance.
4 screws included. Self-tapping thread for plastic mounting points. Torque to 2.5 Nm.
Complete right side window assembly. Mirror image of left side. Tempered glass with frame and latch. Provides ventilation and light.
Includes weather seal pre-installed. Direct OEM replacement for right side sleeper window.
Right side decorative trim strip. Matches left side in design and finish. Chrome insert with black PVC body.
Snap-fit installation. Protects seal edge and enhances cab exterior. Direct replacement for damaged trim.
| Part Number | Part Name |
|---|---|
| 81.96121.0056 | Windshield Sealing Strip |
| DZ14251710030 | Windshield/With Printed Antenna |
| DZ14251710010 | Left Side Wall Window Assembly |
| DZ14251710014 | Left Side Window Glass Sealing |
| DZ14251710015 | Left Side Window Trim Strip |
| 81.62750.0028 | Rear Window Glass |
| 81.96121.0023 | Rear Window Glass Sealing Strip |
| Q230B0616F60 | Cross Slotted Screw And Washer |
| DZ14251710016 | Right Side Wall Window Assembly |
| DZ14251710019 | Right Side Window Trim Strip |
100% OEM fitment with exact match to original part numbers. Direct replacement for cracked, chipped, or leaking glass. No modifications required. Restores factory visibility, safety, and weather sealing.
Automotive-grade laminated windshield (ECE R43) and tempered side/rear glass (FMVSS 205). EPDM seals tested for -40°C to +90°C operation. Printed antenna maintains OEM radio reception quality.
Complete all-in-one kit includes windshield, side windows, rear windows, all sealing strips, trim strips, and mounting screws. No extra ordering. Professional installation recommended for windshield.
Backed by 24-month unlimited mileage warranty against glass defects and seal cracking. Trusted by Shacman fleets and service centers worldwide. Enhances driver visibility, safety, and cab comfort.
Windshield/With Printed Antenna uses laminated PVB interlayer, thickness 4.85mm total. Light transmission 75%, UV block 99%. Printed silver conductive traces for radio signal reception.
Windshield Sealing Strip is extruded EPDM rubber, hardness 65 Shore A. Compression set <15% after 72h at 70°C. Noise reduction up to 3 dB when properly installed.
Left/Right Side Wall Window Assemblies use tempered glass, thickness 3.85mm. Break pattern complies with safety standards. Frames made of black powder-coated aluminum.
Side Window Glass Sealing features dual-lip design with felt flocking on contact surface. Reduces friction and prevents water capillary action.
Rear Window Glass (2 units) are tempered, 4.85mm thick. Heat-soaked to reduce risk of spontaneous breakage. Black ceramic frit around perimeter blocks UV for adhesive bonding.
Rear Window Glass Sealing Strip uses pre-formed corners with butyl adhesive backing. Compression force 4N/cm to ensure watertight seal.
Cross slotted screws are grade 8.8 with zinc plating. Captive washer prevents loss during assembly. Torque specification 2.5 Nm.
Each Shacman X5000 Window Glass component is 100% inspected – glass for inclusions, seals for dimensional accuracy, and frames for fit.
Fits Shacman X5000 models 2018-2026. Windshield fits all cab variants. Side windows fit sleeper cab models. Rear windows fit all X5000 cabs.
Professional installation recommended for windshield (requires adhesive). Side/rear windows DIY: 30-60 minutes each. Tools: Phillips screwdriver, trim tool, glass suction cups.
Glass fully recyclable. EPDM seals contain no hazardous substances. Packaging uses recycled cardboard. Environmentally responsible.
Windshield light transmission: 75% ± 2%. UV rejection: 99%. IR rejection: 35% (green tint). Printed antenna gain: -2 dBi typical.
Tempered glass impact resistance: 200g steel ball drop from 1.5m no breakage. Laminated glass: 225g ball from 4m, interlayer holds fragments.
Seal compression force: 3-5 N/cm. Water leakage test: 15 psi water jet, no penetration. Wind noise reduction: 3 dB at 100 km/h.
Temperature range: -40°C to +90°C operating. Humidity resistance: 95% RH at 65°C for 240 hours.
Every glass component is batch traceable. Quality management certified to IATF 16949 and ECE R43.
ECE R43 certified (windshield), DOT 205 certified (side/rear). ISO 9001:2015 and IATF 16949 production. Traceable batch numbers on each glass unit.
24-month unlimited mileage warranty against glass defects (delamination, distortion, spontaneous breakage). Seals: 12-month against cracking. Global warranty support.
Global stock in USA, Germany, UAE, China, Singapore. Express shipping with crate packaging for glass safety. Restore your X5000 visibility with genuine Shacman X5000 Window Glass.
Stop driving with cracked, fogged, or leaking windows. The Shacman X5000 Window Glass system delivers a complete cab glazing solution with every subcomponent. All 10 part types are included – from windshield with printed antenna to side window assemblies, rear glass, seals, trim strips, and screws. No extra ordering. Upgrade your X5000 today with the authentic Shacman X5000 Window Glass system and experience clear visibility, dry cab, and quiet operation.
Each glass kit is triple-inspected: optical clarity test, seal fitment check, and antenna continuity verification. Professional installers confirm 100% fitment. Maintain driver safety and comfort with the authentic Shacman X5000 Window Glass system.
For complete cab restoration, also consider our door glass assemblies and mirror systems (sold separately). Download the full catalog for installation instructions. Choose premium glazing – choose the Shacman X5000 Window Glass system for your heavy-duty fleet.
Step-by-step (windshield): Remove old glass, clean frame, apply primer and urethane adhesive. Install new windshield with printed antenna facing correct orientation. Let cure 24 hours.
Step-by-step (side window): Unfasten trim screws, remove old assembly. Insert new left/right side wall window assembly into opening, secure with cross slotted screws. Install trim strip over seal edge.
Step-by-step (rear window): Clean opening, place sealing strip onto glass edge, press assembly into cab opening. Sealant may be applied for extra security. Insert screws as needed.
The printed antenna in the windshield connects to a coaxial cable behind the headliner. Ensure proper grounding for optimal radio reception.
Over 12,000 glass kits sold globally with 99.2% customer satisfaction. Fleet managers report 50% reduction in leak-related interior damage after installation.
Individual components are available separately. However, the complete kit offers best value and ensures all seals and trims match.
Technical support includes downloadable PDF with torque specifications and adhesive curing guidelines. Glass matches original Shacman tint (green 71% VLT).
All packaging uses heavy-duty cardboard with foam edge protection for glass safety. Environmentally responsible packaging materials.
The side wall window assemblies include pre-installed rubber seals and latches. Tested for 10,000 open/close cycles.
Upgrade your fleet today. The Shacman X5000 Window Glass system ships within 24 hours from regional warehouses. Bulk discounts for 3+ kits.
Regular maintenance: inspect seals for cracks annually. Clean glass with automotive-grade glass cleaner. Avoid abrasive pads on printed antenna area.
All glass meets ECE R43, DOT 205, and CCC standards worldwide. The window glass system provides perfect match to original cab aerodynamics.
Backed by global logistics, this glass kit is available for air freight with specialized crating. Keep spare seals in your parts inventory for quick repairs.
For complete cab glazing, this is the only kit that includes windshield, both side windows, both rear windows, and every seal and screw.
Each kit includes a desiccant bag for moisture protection during storage. Glass packaged with protective film to prevent scratching.
Trusted by major Shacman dealerships as the official aftermarket source. Genuine components ensure safety and regulatory compliance.
Order now and receive a free installation guide poster. Limited time offer. Upgrade your cab visibility today.
The Shacman X5000 Window Glass system is part of our comprehensive cab restoration program. Ask about bulk discounts for 5+ kits.
Windshield available with or without printed antenna. Specify when ordering. Standard is with antenna for radio/GPS compatibility.
The laminated windshield also provides 99% UV protection, reducing interior fading and heat buildup during long hauls.
All rubber seals are made from high-quality EPDM, tested for 15 years of UV exposure without cracking.
Every glass unit is test-fitted on a master X5000 cab fixture before packing. Guarantees no interference with wipers, mirrors, or headliner.
Backed by 24/7 online technical support. Installation video available via QR code on packaging. The Shacman X5000 Window Glass system is the smart choice for safety and comfort.
