Bearing
Подшипник
Rodamiento
The Shacman Bearing 33019 represents precision engineering excellence for heavy-duty truck applications. This critical component with OEM number 33019 ensures reliable performance in wheel hub and transmission systems. Manufactured to exact specifications, this tapered roller bearing guarantees perfect compatibility with Shacman truck models. The bearing 33019 features optimized geometry that efficiently handles combined radial and axial loads. This design provides superior performance in demanding operating conditions and extends service life significantly. High-grade chrome steel construction ensures exceptional durability under extreme loads. Advanced heat treatment processes enhance material strength and wear resistance. Precision grinding achieves micron-level tolerances for smooth operation. The bearing maintains dimensional stability across various temperature ranges. Proper installation and maintenance ensure optimal performance and longevity. This genuine Shacman part undergoes comprehensive quality control testing. Each unit is verified for dimensional accuracy and load capacity. The 33019 bearing is essential for safe and efficient vehicle operation.
| Parameter | Value |
|---|---|
| OEM Number | 33019 |
| Product Name | Bearing |
| Brand | Shacman |
| Bearing Type | Tapered Roller Bearing |
| Inner Diameter | 95 mm |
| Outer Diameter | 145 mm |
| Width | 32 mm |
| Dynamic Load Rating | 195 kN |
| Static Load Rating | 275 kN |
| Speed Limit | 3800 rpm |
| Material | Chrome Steel |
The Shacman Bearing 33019 incorporates sophisticated engineering features that ensure reliable performance in demanding commercial vehicle applications. Its tapered roller design provides optimal load distribution characteristics for combined radial and axial forces. This configuration handles heavy loads efficiently while maintaining operational stability.
Precision-ground rollers and raceways ensure smooth operation with minimal vibration generation. The robust cage design maintains proper roller alignment under varying load conditions. This prevents skewing and ensures consistent performance throughout the service life.
Advanced heat treatment processes enhance material durability and wear resistance. The bearing maintains dimensional stability across temperature ranges from -20°C to 120°C. Optimized internal clearance accommodates thermal expansion during operation.
The 33019 bearing features exceptional load capacity ratings of 195 kN dynamic and 275 kN static. This enables reliable performance under extreme operating conditions in heavy-duty trucks. The tapered design efficiently manages combined radial and thrust loads.
Premium chrome steel composition provides superior strength characteristics and fatigue resistance. Advanced carburizing processes enhance surface hardness while maintaining core toughness. This ensures extended service life under high-stress applications.
Computer-controlled machining maintains tight tolerances for all critical surfaces and dimensions. Quality control procedures verify dimensional accuracy at multiple production stages. The manufacturing process ensures perfect roller alignment and raceway geometry.
Advanced inspection techniques guarantee compliance with original equipment specifications. Each bearing undergoes thorough testing before approval for distribution. This commitment to precision manufacturing delivers reliable performance.
The Bearing 33019 is designed for use in various Shacman truck models requiring reliable rotational performance. This component serves critical functions in wheel hub assemblies and transmission systems. Its robust construction withstands demanding conditions in commercial transportation.
This bearing demonstrates perfect compatibility with Shacman X3000 series trucks and other heavy-duty models. The standardized dimensions ensure straightforward replacement in existing systems. Proper fitment guarantees optimal performance and extended service life.
The bearing suits applications in differential units and power transmission components. Its versatile design supports both front and rear axle configurations. Always verify specific model compatibility using Shacman’s official documentation.
The 33019 provides perfect fitment for Shacman X3000 series trucks used in long-haul transportation. The bearing’s load capacity matches the requirements of heavy-duty applications. Compatibility extends to various transmission systems and wheel assemblies.
Multiple Shacman commercial vehicle series benefit from this bearing’s consistent performance. Cross-reference OEM numbers to ensure correct part selection. This diligence prevents installation issues and guarantees optimal functionality.
Proper installation of the Bearing 33019 requires careful preparation and adherence to technical specifications. Begin by ensuring all mounting surfaces are clean and free from damage or contamination. Remove any existing components and thoroughly clean the housing area.
Inspect the shaft and housing for any signs of wear, scoring, or corrosion damage. Lubricate the bearing thoroughly with specified high-temperature grease before installation. Position the 33019 bearing according to manufacturer orientation guidelines.
Use appropriate bearing installation tools and avoid direct impact on bearing rings. Verify correct clearance and preload settings during the installation process. Conduct comprehensive inspection before system operation and testing.
Basic tools include bearing pullers, hydraulic presses, and precision measurement instruments. Wear appropriate personal protective equipment during installation procedures. Ensure proper lighting and access to the work area for safe installation.
Verify component integrity and surface conditions before beginning installation. Do not apply excessive force that could damage bearing components during installation. Follow all safety guidelines and technical recommendations throughout the process.
The Bearing 33019 delivers exceptional performance benefits for Shacman truck operators and fleet managers. Its optimized tapered roller design ensures efficient load distribution and minimal energy loss. This translates to improved fuel efficiency and reduced operating costs.
Enhanced durability characteristics provide extended service life under demanding operating conditions. The precision engineering guarantees smooth operation and reduced vibration levels. These advantages contribute to improved vehicle performance and reliability.
Operators experience reduced maintenance requirements and longer service intervals with genuine Shacman components. The bearing’s robust construction withstands extreme loads and harsh environmental conditions. Consistent performance is maintained throughout the recommended service life.
The 33019 contributes to enhanced operational efficiency through reduced friction and minimal power loss. Its consistent performance supports optimal power transmission and vehicle dynamics. The design minimizes heat generation during extended operation periods.
Reduced vibration levels create a better driving experience and component longevity. The bearing’s reliability ensures protection for connected drivetrain components. These factors combine to deliver superior operational value and vehicle uptime.
Regular maintenance is essential for maximizing the performance and service life of the 33019 bearing. Establish consistent inspection schedules based on vehicle operating conditions and mileage accumulation. Document all maintenance activities thoroughly for service records.
Monitor bearing condition for signs of wear, noise generation, or temperature increase during operation. Check lubrication levels and quality regularly to detect potential issues early. Verify proper mounting and alignment during scheduled service intervals.
For severe service conditions, more frequent inspections may be necessary to ensure optimal performance. Listen for unusual noises that might indicate bearing wear or lubrication issues. Address any abnormalities promptly to prevent further damage to vehicle systems.
Proper lubrication is critical for bearing performance and longevity. Use only recommended high-temperature lithium-based greases as specified by the manufacturer. Follow specified relubrication intervals based on operating conditions and environment.
Ensure complete grease purging during relubrication procedures to remove contaminated lubricant. Monitor grease condition during routine maintenance inspections for discoloration or contamination. Harsh environments may require more frequent lubrication intervals.
Every Bearing 33019 undergoes rigorous quality assurance procedures throughout the manufacturing process. Shacman employs advanced production technologies and strict quality control measures to ensure component reliability. The manufacturing facility maintains ISO 9001 quality management certification.
The comprehensive manufacturing process includes multiple inspection stages to verify material quality and dimensional accuracy. Each unit is tested for noise levels, vibration characteristics, and load capacity before distribution. Complete traceability documentation accompanies every shipment.
The bearing assembly is subjected to comprehensive testing protocols including accelerated life testing and environmental exposure. Performance evaluation ensures compliance with Shacman’s high standards for automotive components and international regulations.
Durability testing simulates long-term vehicle operation under various environmental conditions and load patterns. Thermal cycling evaluates performance across extreme temperature ranges from -40°C to 120°C. Load testing validates structural integrity under maximum stress conditions.
Material analysis verifies chrome steel composition and mechanical properties meet specifications. Certification documents provide evidence of compliance with international automotive standards. These processes guarantee reliable performance and customer satisfaction.
Selecting genuine Shacman bearing components like the 33019 ensures perfect compatibility and reliable performance. Original equipment bearings are precision-engineered to exact specifications for optimal system integration. This guarantees proper fitment and operational characteristics.
Genuine Shacman parts undergo rigorous testing protocols that aftermarket alternatives may not match. The manufacturer’s commitment to quality means components are backed by comprehensive technical support. Consistent use of authentic parts helps maintain vehicle value and performance standards.
Choosing genuine components represents a strategic investment in operational safety and vehicle reliability. The 33019 bearing is manufactured with premium materials and advanced processes. This ensures long-term value and reduced total cost of ownership.
Genuine components provide extended service life and reduced maintenance costs over the operational lifecycle. Proper compatibility prevents additional wear on connected drivetrain elements and related components. Consistent quality ensures reliable performance throughout the entire bearing service life.
Manufacturer warranty coverage offers appropriate protection against material defects and workmanship issues. Technical support is readily available for installation guidance and maintenance questions. These benefits justify the investment in genuine Shacman components for optimal vehicle performance.
Understanding common bearing issues can help operators identify problems early and implement appropriate solutions. Unusual noises typically indicate lubrication issues, contamination, or component wear. Excessive heat generation often suggests inadequate lubrication or overloading conditions.
Vibration abnormalities may stem from bearing damage, misalignment, or improper installation. Reduced performance can result from wear, contamination, or lubrication breakdown. Visual inspection helps identify visible damage, corrosion, or seal deterioration.
Functional testing determines whether issues relate specifically to the bearing or other system components. Consultation with technical documentation provides guidance for specific troubleshooting scenarios. Professional assessment is recommended for complex issues.
Check lubrication levels and quality if experiencing noise or temperature issues. Inspect mounting surfaces and alignment if noticing vibration abnormalities. Verify proper installation and clearance settings if performance degradation occurs.
Replace damaged components promptly rather than attempting temporary repairs. Use only genuine Shacman parts for all replacements to ensure compatibility. Follow recommended procedures meticulously during reinstallation for optimal performance.
Proper storage conditions are essential for maintaining bearing integrity before installation. Store bearings in clean, dry environments with controlled humidity levels. Protect from dust, moisture, and corrosive substances that could damage components.
Implement proper inventory management systems using first-in-first-out principles. Keep original packaging intact until installation to prevent contamination. Avoid exposing bearings to temperature extremes or direct sunlight during storage.
Handle bearings with clean gloves to prevent corrosion from skin contact. Use appropriate lifting equipment for heavy bearing units. These practices ensure optimal condition when components are ready for installation.
Maintain protective coatings and packaging until immediately before installation. Regularly inspect stored bearings for signs of corrosion or damage. Rotate stock according to manufacturing dates to ensure fresh inventory usage.
Control storage area temperature to prevent condensation formation. Use desiccant materials in storage containers when necessary. These measures preserve bearing quality and performance characteristics.
The Shacman Bearing 33019 represents engineering excellence in commercial vehicle components. Its advanced tapered roller design, precise manufacturing, and reliable performance make it the ideal choice for maintaining Shacman truck operations. By selecting this genuine component, operators ensure optimal load capacity, extended service life, and operational efficiency. Invest in quality and reliability with the 33019 bearing for your vehicle maintenance requirements and enhanced performance in heavy-duty transportation applications.
