The Shacman X5000 Front Headlight Assembly is a complete original equipment front lighting system for X5000 series trucks. It includes full LED combination lights, turn signals, side marker lights, and all mounting hardware such as hexagon flange bolts, lock nuts, washers, and hex nuts. This comprehensive kit ensures optimal illumination, road compliance, and a perfect OEM fit. The Shacman X5000 Front Headlight Assembly directly replaces worn or damaged headlamps, side markers, and turn signals, restoring the vehicle’s visibility and safety to factory standards.
The Left Front Combination Light (Full LED) (Part DZ97189723353) is a full‑LED headlamp for the driver side. It provides low beam (1800 lm), high beam (2400 lm), DRL, and turn signal functions. Housing: die‑cast aluminium with polycarbonate lens, sealed to IP6K9K. LED lifespan 50,000 hours. Includes active cooling fan. Direct OEM replacement.
Full LED | 2400 lm high beam | ECE R112 | IP6K9K
The Hexagon Flange Bolt (Part Q1840625T1F31) is an M6x25mm bolt with an integrated flange, grade 10.9, zinc‑flaky coated (Geomet). Serrated flange bites into the mounting surface, eliminating separate washers. Torque: 10 Nm. Used to secure headlamps and turn signals. 4 bolts supplied.
M6x25 | Grade 10.9 | Serrated flange | Thread locker patch
The Right Front Combination Light (Part DZ97189723354) is the passenger side counterpart, with identical full‑LED optics. Includes adaptive front lighting system (AFS) for cornering illumination. It uses the same aluminium housing and sealing. Plug‑and‑play with original Deutsch connectors. Weight: 2.8 kg.
Full LED | AFS cornering | ECE approved | Deutsch connector
The Left Turn Signal (LED) (Part DZ97189721331) is an amber LED side turn indicator, mounted on the fender or mirror. Output 50 lm, flash rate 90±30 per minute. Polycarbonate lens, sealed to IP67. Includes a 300mm pigtail. Direct replacement for faded incandescent units.
Amber LED | 50 lm | IP67 | ECE R6 approved
The All Metal Hexagonal Flange Locking Nut-Galvanized (Part Q33006) is an M6 prevailing‑torque lock nut, class 8, hot‑dip galvanized. The all‑metal design provides vibration resistance without a plastic insert. Torque: 8 Nm. Used for turn signal and side marker mounting. 2 nuts supplied.
M6 | Class 8 | Prevailing torque | Hot‑dip galvanized
The Right Turn Signal Lamp/LED (Part DZ97189721332) is the right side version of the LED turn signal. Same 50 lm output, IP67 sealing, and 300mm pigtail. Includes a right‑angle mounting bracket for precise fitment. Compliant with ECE R6. Weight: 0.08 kg.
Right side specific | E‑marked | UV‑stable lens | 12/24V
The Side Marker Light (With 1400Mm Wire) (Part 81.25260.6101) is an amber LED clearance lamp with a 1.4m pre‑attached cable. 5 LEDs, 25 lm output. Housing: ABS, lens: polycarbonate. Sealed to IP66. Used on cab sides or front fenders. Includes rubber mounting gasket. 2 lamps supplied.
Amber LED | 1.4m cable | IP66 | 12/24V auto‑range
The Large Washer (Galvanized) (Part Q402B05) is a hardened flat washer for M5 bolts, inner diameter 5.3mm, outer diameter 16mm, thickness 1.5mm. Hot‑dip galvanized. Used under the hex nut to distribute clamping load on plastic lamp housings. 4 washers supplied.
5.3x16x1.5mm | Hardened steel | Galvanized | Load distribution
The Type 1 Hex Nut (Part Q340B05) is a standard M5 hex nut, property class 8, zinc‑nickel plated. Height 4mm, width across flats 8mm. Used together with the large washer to secure side marker lights. Torque 5 Nm. 4 nuts included.
M5 | Class 8 | ZnNi coated | Nylon insert optional
| Part Number | Part Name |
|---|---|
| DZ97189723353 | Left Front Combination Light (Full LED) |
| Q1840625T1F31 | Hexagon Flange Bolt |
| DZ97189723354 | Right Front Combination Light |
| DZ97189721331 | Left Turn Signal (LED) |
| Q33006 | All Metal Hexagonal Flange Locking Nut-Galvanized |
| DZ97189721332 | Right Turn Signal Lamp/LED |
| 81.25260.6101 | Side Marker Light (With 1400Mm Wire) |
| Q402B05 | Large Washer (Galvanized) |
| Q340B05 | Type 1 Hex Nut |
Complete OEM part list – all headlamps, turn signals, side markers and fasteners.
✔️ 100% OEM Fit & Full LED Performance – Headlamps, turn signals and side markers are manufactured to original Shacman tooling. Direct bolt‑on replacement with zero modifications. Full LED technology delivers 2400 lm high beam, reducing eye strain and increasing safety.
🔧 Complete Hardware Kit Included – This assembly provides every fastener: flange bolts, lock nuts, large washers and hex nuts. No separate hardware purchase needed. Pre‑applied thread locker on bolts ensures vibration‑resistant installation.
🛡️ Weatherproof & Corrosion Resistant – Headlamps sealed to IP6K9K, side markers IP66, turn signals IP67. All fasteners zinc‑nickel or hot‑dip galvanized, passing 720h salt spray. Lenses UV‑stabilised polycarbonate. Suitable for extreme climates.
🚛 Reduced Downtime & Legal Compliance – Faded or cracked headlamps cause MOT failures and unsafe driving. Replacing with genuine Shacman X5000 Front Headlight Assembly restores full ECE compliance (R112, R6, R91). 12‑month warranty. Bulk fleet pricing available.
Full LED headlamp (left/right): low beam 1800 lm, high beam 2400 lm, colour temperature 6000K. Turn signal LED: 50 lm, flash rate 1.5 Hz. Side marker: 5 LEDs, 25 lm, 120° viewing angle. Flange bolt: M6x25, grade 10.9, proof load 15 kN. Lock nut: M6 prevailing torque, class 8. Washer: M5 hardened, HV 200. Hex nut: M5 class 8. The Shacman X5000 Front Headlight Assembly meets ECE R48, R112, R6 and R91 standards. Vibration tested to ISO 16750‑3 severity class V.
Temp Range
Lamps: -40°C to +80°C. Fasteners: -50°C to +200°C.
Applications
Shacman X5000, X3000, F3000 front lighting systems. Direct fit for both RHD and LHD variants.
Certifications
ECE R112 (headlamps), R6 (turn signals), R91 (markers). IP ratings certified. Fasteners IATF 16949.
1. Disconnect battery. Remove old headlamps. 2. Install new headlamps using hexagon flange bolts (torque 10 Nm). 3. Mount turn signals with lock nuts (torque 8 Nm). 4. Attach side marker lights using large washers and hex nuts (torque 5 Nm). 5. Connect Deutsch plugs. 6. Test all functions. Re‑check torque after 500 km. Clean lenses only with damp cloth – avoid solvents. Replace any lamp that shows water ingress or flickering.
Headlamp housing: die‑cast aluminium A380, powder coated black. Lens: polycarbonate with hardcoat. LEDs: Osram Oslon. Connectors: Deutsch DT series. Fasteners: 10B21 steel, ZnNi or Geomet coating. Each headlamp undergoes 24‑hour burn‑in and water spray test. Fasteners are torque‑retention verified. Complete kit packed in foam‑lined box with desiccant and QR traceability.
Worn headlamps reduce night visibility and cause driver fatigue. Replacing with genuine Shacman X5000 Front Headlight Assembly cuts energy consumption (LEDs draw 25W vs 110W for halogen) and eliminates bulb replacements (50,000 hour LED life). The complete kit avoids mismatched parts and repeated repairs. Volume discounts for 5+ kits. Download catalog or request quotation via buttons above. Express shipping from regional centers.
Yellowed or cloudy lenses, dim light output, intermittent turn signals, cracked housings, water condensation inside, loose mounting due to rusted fasteners. Replace with Shacman X5000 Front Headlight Assembly immediately. Inspect every 100,000 km – retorque bolts and clean electrical contacts.
Generic headlamps often use LED chips without proper beam cutoff, causing glare. Housings are plastic that degrades in UV. Fasteners are plain steel that rust. Our genuine Shacman X5000 Front Headlight Assembly uses certified optics, aluminium housings, and corrosion‑resistant hardware. Choose original for safety, legality and long‑term reliability.
Final recommendation: Always replace the entire front headlight assembly set to ensure uniform light output and appearance. The Shacman X5000 Front Headlight Assembly provides a complete OEM solution for headlamps, turn signals, side markers and all mounting hardware. Trust Shacman for genuine quality and road safety.
