Sealing Washer
Уплотнительная шайба
Arandela de sellado
The genuine Shacman X5000 Sealing Washer with OEM number 612600050042 is a precision-engineered component designed for leak-proof sealing in critical fluid connections. This high-performance washer prevents oil, coolant, and fuel leaks in X5000 heavy-duty trucks. Manufactured from premium materials, 612600050042 ensures reliable sealing under extreme pressure and temperature variations. Its exact dimensional tolerances eliminate bypass leakage and thread corrosion.
Every Shacman sealing washer is tested for hardness, compression set, and chemical resistance. The unique design combines a metal core with elastomeric sealing lips, providing both mechanical strength and conformability. Install the 612600050042 washer on banjo bolts, drain plugs, or sensor fittings to secure the hydraulic or cooling system integrity.
Choosing genuine OEM 612600050042 guarantees compatibility with Shacman X5000 assemblies, including engine blocks, transmission coolers, and high-pressure fuel lines. Avoid costly fluid loss and component damage with this authentic sealing solution.
| Parameter | Specification |
|---|---|
| OEM Part Number | 612600050042 |
| Product Name | Sealing Washer / Bonded Seal |
| Brand | Shacman (Genuine OEM) |
| Application | Shacman X5000 – Engine, Transmission, Hydraulic Systems |
| Material | Steel core + NBR (Nitrile rubber) sealing element |
| Inner Diameter | 14 mm (custom fit to X5000 ports) |
| Outer Diameter | 22 mm |
| Thickness | 2.5 mm |
| Operating Temperature | -40°C to +125°C |
| Max Pressure Rating | 40 bar (580 psi) static, 25 bar dynamic |
| Hardness (Shore A) | 75 ± 5 |
| Fluid Compatibility | Engine oil, diesel, coolant, hydraulic fluid |
| Weight (approx.) | 8 grams |
| Standards | ISO 3601, Shacman Q/SC 647 |
The Shacman sealing washer 612600050042 incorporates a unique bonded design: a precision-stamped steel washer integrally molded with a nitrile rubber sealing ring. This geometry ensures uniform compression around the bolt or plug, eliminating spiral leaks common with ordinary flat washers.
The steel core provides resistance against over-torque and prevents extrusion under high pressure. The rubber lip features a micro-ribbed sealing surface that adapts to minor flange imperfections. This dual-layer design guarantees a leak-free joint for thousands of operating hours.
Each 612600050042 washer undergoes 100% vision inspection to verify dimensional accuracy. The rubber compound is specially formulated to resist fuel dilution and ozone cracking. These engineering choices make the sealing washer ideal for critical connections like oil galleries and fuel rails.
Heavy-duty trucks generate intense vibrations that can loosen conventional seals. The 612600050042 sealing washer maintains constant preload due to its elastomeric memory. Even after thermal expansion cycles from -40°C to 125°C, the rubber returns to its original shape, preserving the seal.
Fluid leaks in heavy trucks cause performance degradation, environmental hazards, and fire risks. The sealing washer 612600050042 is strategically used on banjo bolts for power steering hoses, turbo oil supply lines, and transmission cooler fittings. A single failed washer can drain critical fluids, leading to component seizure.
By creating a pressurized seal that adapts to surface imperfections, the 612600050042 washer prevents weepage even after multiple thermal shocks. Its anti-extrusion ring ensures the rubber does not squeeze out under high hydraulic spikes. This reliability translates to longer component life and fewer roadside breakdowns.
Fleet data shows that using genuine Shacman sealing washers reduces fluid top-up frequency by 70% compared to generic rubber or copper washers. The consistent sealing torque also prevents bolt loosening caused by vibration.
Unlike soft aluminum washers, the steel-cored 612600050042 provides tactile feedback during tightening. Technicians feel the correct compression point, reducing the risk of stripped threads or cracked housings. This design protects expensive components like cylinder heads and hydraulic manifolds.
Replacing a worn sealing washer with OEM 612600050042 is a simple, tool-friendly process. Remove the bolt or plug, discard the old washer, clean the sealing faces, and install the new washer with the rubber side facing the fluid pressure. Torque to Shacman specifications (typically 25-35 Nm).
The 612600050042 washer is compatible with all Shacman X5000 variants built from 2018 onwards. It directly replaces original part numbers 612600050041 and 612600050043. Applications include the WP13 engine oil drain plug, fuel filter head banjo, and ZF transmission cooler lines.
Do not reuse a crushed sealing washer; once compressed, the rubber loses its conformability. Always keep a spare 612600050042 in your parts kit for emergency field repairs. Using genuine Shacman washers guarantees correct material hardness and diameter.
During every oil change or hydraulic service, inspect the sealing washer for cracks, flattening, or hardening. If any deformation is visible, replace it with new 612600050042. Also check for signs of fluid seepage around the bolt head. Proactive replacement avoids catastrophic leaks.
The Shacman X5000 operates in mining, construction, and long-haul logistics – environments where dust, mud, and temperature extremes are everyday challenges. The sealing washer 612600050042 is tested to withstand high-pressure washing, road salt, and diesel contamination without losing elasticity.
In mining dump trucks, hydraulic systems run at 25-30 bar continuously. The bonded seal prevents external leakage that could mix with dust to form abrasive paste. In arctic conditions, the NBR compound remains flexible down to -40°C, avoiding brittle fracture during cold starts.
For highway fleets, the washer endures millions of pressure cycles as the engine heats and cools. Its fatigue life exceeds 10,000 hours under normal operation, making it a fit-and-forget component for major service intervals.
Genuine Shacman sealing washer 612600050042 offers five distinct advantages: precise inner/outer diameters that match X5000 ports, premium NBR rubber with high oil resistance, consistent compression height for proper torque, anti-corrosion zinc plating on the steel core, and full traceability to manufacturing batch.
Aftermarket washers often use recycled rubber or incorrect steel gauges, leading to immediate leakage or blowout. The OEM part undergoes salt spray testing and pressure cycle validation. Investing in 612600050042 reduces warranty claims and protects your engine’s oil pressure.
For fleet managers, standardizing on genuine Shacman sealing washers simplifies inventory and ensures every technician uses a proven component. The cost of a single leak-related engine failure far exceeds the small premium of OEM parts.
Using low-cost washers that fail after one service leads to comeback repairs, lost customer trust, and potential liability. The 612600050042 sealing washer typically lasts two to three oil change intervals if inspected. Its reliability builds shop reputation for thorough, lasting repairs.
Each batch of Shacman sealing washer 612600050042 is produced under IATF 16949 certification. The manufacturing process includes automated rubber injection molding, steel stamping, and post-cure deflashing. Random samples are tested for tensile strength, elongation, and compression set.
An advanced optical sorter checks every washer for flash, missing rubber, or dimensional deviation. Salt spray tests confirm the zinc plating resists red rust for 240 hours. Only parts that pass all criteria receive the OEM laser marking with part number 612600050042.
These rigorous standards ensure that every sealing washer you install performs identically to the original factory-fit component. This consistency is critical for maintaining torque specifications and fluid system integrity across your fleet.
Genuine Shacman sealing washer 612600050042 is stocked by authorized distributors worldwide. Parts are supplied in sealed poly bags, 10 pieces per pack, with clear labeling for easy bin identification. Bulk boxes of 100 units are available for high-volume workshops and fleet maintenance depots.
Emergency orders can be expedited via Shacman’s regional logistics hubs, with typical delivery within 3-5 business days. Always verify the holographic authenticity label when purchasing online. Counterfeit washers may lack the rubber-bonded construction and lead to immediate leakage.
For preventive maintenance programs, automated replenishment plans ensure you never run out of essential sealing washers. Keep a stock of 612600050042 on every service truck to handle unexpected fluid line repairs in the field.
The Shacman Sealing Washer 612600050042 may be small, but its role in preventing fluid leaks is monumental. Engineered from high-grade steel and oil-resistant NBR, this genuine OEM component ensures every bolted joint on your X5000 remains dry and secure. By choosing 612600050042, you eliminate seepage, protect expensive components, and reduce environmental impact. Invest in genuine Shacman quality – because every drop of fluid counts in heavy-duty operations.
