Secure The Strap Pad
Защитная Накладка Ремня
Almohadilla Protectora
OEM Secure The Strap Pad DZ95259740739 precision‑molded for the Shacman X5000 heavy‑duty truck. This protective DZ95259740739 cushioning element prevents metal‑to‑metal contact between securing straps and mounted components, absorbing vibration and eliminating abrasion damage.
Manufactured from durable EPDM rubber with excellent weathering resistance, the Secure The Strap Pad DZ95259740739 maintains its elasticity and cushioning properties through years of exposure to harsh environmental conditions.
Replacing worn or missing pads with the genuine DZ95259740739 component prevents the progressive surface damage that leads to component failure and costly repairs.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ95259740739 |
| Product Name | Secure The Strap Pad |
| Brand / Model | Shacman X5000 |
| Material | EPDM Rubber with Fabric Reinforcement |
| Pad Dimensions | 95.00 mm × 65.00 mm × 5.00 mm |
| Hardness | 65 Shore A |
| Operating Temperature | -40°C to +120°C |
| Installation Method | Self‑adhesive backing with peel‑off liner |
| UV Resistance | Excellent, no cracking after 1000 hours exposure |
| Application | Shacman X5000 strap mounting points and component protection |
The DZ95259740739 secure the strap pad serves as a critical interface between metal securing straps and the components they hold in place. It creates a compliant barrier that prevents the hard strap material from cutting into softer surfaces.
In the Shacman X5000, these pads are used at strap contact points on urea tanks, air reservoirs, and other cylindrical or irregularly shaped components. Without proper padding, strap tension can abrade protective coatings and initiate corrosion.
The Secure The Strap Pad DZ95259740739 also increases the coefficient of friction between the strap and the secured component, reducing the tendency for the component to shift or rotate under dynamic vehicle loading conditions.
The DZ95259740739 pad is manufactured from EPDM rubber, a material selected for its outstanding resistance to ozone, ultraviolet radiation, and temperature extremes that cause other elastomers to harden and crack prematurely.
An internal fabric reinforcement layer provides dimensional stability and prevents the pad from stretching or extruding under sustained compressive loads. This ensures consistent cushioning performance throughout the pad’s service life.
The DZ95259740739 pad features a pressure‑sensitive adhesive backing that bonds to clean, dry surfaces. The mounting area must be free of oil, dirt, and rust to ensure maximum adhesion and long‑term retention.
After peeling the protective liner, the pad should be positioned carefully and pressed firmly into place with uniform pressure across its entire surface. Full adhesive bond strength develops within 24 hours at room temperature.
Each production batch of DZ95259740739 pads is tested for hardness, tensile strength, and elongation at break. These physical properties must fall within specified ranges to ensure consistent field performance.
Adhesion testing verifies that the self‑adhesive backing meets the minimum peel strength requirement when applied to representative substrate materials. The pad must not lift or shift under the rated temperature conditions.
A hardened or cracked DZ95259740739 pad has lost its cushioning ability and should be replaced. The secured component may show signs of surface abrasion where the strap contacts it directly through the degraded pad.
A pad that has shifted from its original position or is missing entirely exposes the component to direct strap contact. This condition should be corrected immediately to prevent progressive wear damage.
During routine vehicle inspections, all strap mounting points should be checked for pad presence and condition. Replacing worn pads with new Secure The Strap Pad DZ95259740739 units is a simple preventive maintenance action.
The DZ95259740739 pad is dimensioned for the strap widths and component contours found throughout the Shacman X5000 chassis and emissions systems. It fits correctly at each designated mounting location.
Fleet workshops should maintain an inventory of these pads as part of their standard hardware and consumable supplies. Having genuine pads readily available encourages timely replacement during routine service.
Aftermarket pads with inferior adhesive or rubber compounds can detach or degrade rapidly. We supply only the authentic Shacman X5000 Secure The Strap Pad DZ95259740739 manufactured to OEM quality standards.
Each pad is individually packaged with its adhesive liner intact to preserve bonding properties until installation. The part number DZ95259740739 is clearly printed on the packaging label.
Our international supply chain ensures that genuine DZ95259740739 strap pads are available for immediate dispatch to dealerships and fleet maintenance facilities across all major continents.
Multi‑pack of secure the strap pads with self‑adhesive backing. Protective liner preserves adhesive freshness until installation.
Expert guidance on pad placement and surface preparation. We help ensure your DZ95259740739 pads provide effective long‑term abrasion protection.
For current stock availability and pricing on the genuine Secure The Strap Pad DZ95259740739, please use the contact buttons above.
