Cross Beam Assembly
Поперечная Балка
Travesaño Transversal
OEM Cross Beam Assembly DZ95259594125 precision‑engineered for the Shacman X5000 heavy‑duty truck chassis. This robust DZ95259594125 structural member provides lateral rigidity between the chassis frame rails, maintaining proper alignment under heavy load conditions.
Fabricated from high‑strength structural steel with comprehensive anti‑corrosion protection, the Cross Beam Assembly DZ95259594125 resists the torsional forces and bending moments encountered during demanding vehicle operations.
Replacing a damaged or corroded cross beam with the genuine DZ95259594125 assembly restores proper chassis stiffness and prevents the frame misalignment that causes uneven tire wear and handling instability.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ95259594125 |
| Product Name | Cross Beam Assembly |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Structural Steel with Black Powder Coating |
| Beam Type | Box‑section welded fabrication with end flanges |
| Overall Length | Approximately 860.00 mm |
| Mounting Bolt Pattern | 4‑bolt pattern at each end, 14 mm holes |
| Load Capacity | Designed for heavy‑duty chassis reinforcement |
| Corrosion Protection | Black powder coating, 600 hours salt spray rated |
| Application | Shacman X5000 chassis frame lateral reinforcement |
The DZ95259594125 cross beam assembly is a fundamental chassis component that connects the left and right frame rails, providing essential lateral stiffness and maintaining the precise dimensional relationship between the two longitudinal members.
Heavy trucks experience significant torsional loading when traversing uneven terrain, crossing ditches, or maneuvering on sloped surfaces. The cross beam resists the twisting forces that would otherwise distort the frame structure.
The Cross Beam Assembly DZ95259594125 also serves as a mounting platform for various chassis components, including the urea supply module, air tanks, and exhaust system supports on the Shacman X5000 platform.
The DZ95259594125 cross beam features a box‑section design that provides maximum torsional rigidity with minimum weight. The closed section resists both bending and twisting loads more effectively than open channel sections.
Precision‑welded end flanges provide robust attachment points to the chassis frame rails, distributing the loads evenly into the frame structure and preventing stress concentrations at the bolt holes.
The DZ95259594125 cross beam mounts to pre‑existing holes in the chassis frame rails using high‑strength bolts and prevailing‑torque lock nuts. The mounting surfaces must be clean and free of corrosion before installation.
All bolts should be started by hand to avoid cross‑threading and then tightened progressively in a diagonal pattern to the specified torque. Proper alignment of the cross beam is essential for maintaining correct frame geometry.
Each production batch of DZ95259594125 cross beams is sampled for dimensional verification using coordinate measuring equipment. Overall length, flange flatness, and hole positions are confirmed against engineering specifications.
Weld integrity is verified through visual inspection and non‑destructive testing methods. The welded joints must show complete penetration without porosity, undercut, or other defects that could compromise structural strength.
Rust staining or bubbling of the powder coating on the DZ95259594125 cross beam indicates that corrosion has penetrated the protective layer. If left unaddressed, this can progress to metal loss that reduces the structural cross‑section.
Cracks propagating from bolt holes, weld toes, or along the box section corners are evidence of fatigue or overload damage. Cracked cross beams must be replaced immediately to maintain chassis structural integrity.
During routine chassis inspections, the cross beam and its mounting hardware should be checked for tightness and structural condition. Loose or damaged cross beams compromise the entire frame assembly.
The DZ95259594125 cross beam assembly is specifically configured for the Shacman X5000 chassis frame rail spacing and bolt patterns. It matches the factory‑specified mounting locations exactly.
Fleet operators should maintain spare cross beam assemblies for rapid replacement when collision damage or severe corrosion compromises the original structural member. Timely replacement maintains chassis safety and performance.
Aftermarket cross beams with inferior material specifications or incorrect dimensions can compromise chassis integrity. We supply only the authentic Shacman X5000 Cross Beam Assembly DZ95259594125 built to OEM standards.
Each assembly is individually packaged with protective edge guards to prevent coating damage during transit. The part number DZ95259594125 is clearly displayed on both the component label and shipping documentation.
Our international supply chain maintains strategic inventory levels to support fleet operators and service facilities worldwide. Genuine DZ95259594125 cross beams are dispatched promptly to minimize vehicle downtime.
Complete cross beam assembly with welded end flanges and protective powder coating. Mounting hardware available separately for chassis installation.
Expert guidance on cross beam installation and chassis alignment procedures. We help ensure your DZ95259594125 assembly provides reliable structural reinforcement.
For current stock availability and delivery scheduling on the genuine Cross Beam Assembly DZ95259594125, please use the contact buttons above.
