The Shacman X5000 Left Toolbox Body Assembly is an OEM left‑side storage system for the Shacman X5000 heavy truck. This complete kit includes the rotomolded toolbox body, lock assembly, wire drawing assembly, foaming, lock bracket, and all required fasteners. It provides secure, weather‑resistant storage for tools and gear. Below each component is described in detail.
The Left Toolbox Body is rotationally molded from LLDPE. Capacity: 85 liters.
Material resists impacts, UV rays, and temperatures from -40°C to +85°C.
Integrated drain holes prevent water accumulation inside the compartment.
This body accepts the lock assembly and foaming for noise reduction.
Complete lock mechanism with two keys. Die‑cast zinc housing.
The lock cylinder is weather‑sealed and resists freezing in winter.
Mounts directly to the toolbox body using the lock bracket.
Provides secure closure to prevent theft of tools and equipment.
Wire drawing assembly transmits rotation from the lock to the latch.
Sheathed stainless steel cable with adjustable ends for precise fit.
Length: 450mm, includes return spring for positive latch release.
Prevents binding even if the toolbox is misaligned during installation.
Pre‑cut polyurethane foam padding that lines the interior of the toolbox.
Reduces rattle and noise from loose tools during transit.
Also provides thermal insulation and protects tools from impacts.
Self‑adhesive backing for simple installation inside the toolbox body.
Stamped steel bracket that holds the lock cylinder and wire drawing assembly.
Zinc‑plated finish for corrosion resistance (520h salt spray).
Includes captive M6 nuts for easy bolt‑on attachment to the toolbox body.
Proper alignment ensures smooth key rotation and latch operation.
Six M6x20 and four M6x35 hexagon flange bolts. Property class 8.8.
Zinc flake coated (720h salt spray). Integrated flange replaces washer.
Used to secure the toolbox body to mounting brackets and the lock bracket.
Torque specification: 10-12 Nm. Reusable multiple times.
Four all‑metal hexagonal lock nuts, M6 thread. Prevailing torque design.
No nylon insert; elliptical thread distortion provides vibration resistance.
Reusable up to 5 times while maintaining clamp force.
Used with the hexagon flange bolts for secure fastening of the toolbox.
Four large washers, 6mm inner diameter, 18mm outer diameter.
Galvanized finish, 1.5mm thickness. Distributes load under bolt heads.
Prevents pull‑through of plastic toolbox components.
Reusable and corrosion‑resistant for harsh environments.
| Part Number | Part Name |
|---|---|
| DZ14251290015 | Left Toolbox Body |
| DZ14251290017 | Left Toolbox Lock Assembly |
| DZ14251290019 | Lock Wire Drawing Assembly |
| DZ14251290020 | Toolbox Foaming |
| DZ14251290041 | Tool Box Lock Bracket Assembly |
| Q1840620T1F31 | Hexagon Flange Bolt |
| Q1840635T1F31 | Hexagon Flange Bolt |
| Q33206 | 2 Type All Metal Hexagonal Lock |
| Q402B06F60 | Large Washer |
Box material
LLDPE (rotomolded)Capacity / load
85 L / 50 kgLock type
Keyed cylinder w/ wire cableFoaming thickness
8 mm closed‑cell PUThe Left Toolbox Body (DZ14251290015) is rotationally molded from UV‑stabilized LLDPE. This process ensures uniform wall thickness (4 mm nominal) with no weld lines, eliminating weak points.
The Lock Wire Drawing Assembly (DZ14251290019) uses a 1.5mm diameter stainless steel cable inside a nylon sheath. Operating force is less than 25 N.
Hexagon flange bolts (Q1840620T1F31 and Q1840635T1F31) meet ISO 898-1 property class 8.8. The flange eliminates the need for a separate washer under the head, reducing assembly time.
2 Type All Metal Hexagonal Lock nuts (Q33206) are manufactured from low‑carbon steel with a phosphated finish. The prevailing torque design meets IFI‑124 standards for vibration resistance.
Step 1: Remove old toolbox and clean mounting brackets on the chassis rail.
Step 2: Install the Tool Box Lock Bracket Assembly (DZ14251290041) onto the toolbox body using two M6x20 hexagon flange bolts and two locknuts. Torque to 10 Nm.
Step 3: Insert the Lock Wire Drawing Assembly (DZ14251290019) into the lock bracket and connect to the latch point. Adjust cable tension so the latch releases with 15‑20 mm key rotation.
Step 4: Attach the Left Toolbox Lock Assembly (DZ14251290017) to the bracket using two M6x20 bolts. Test key operation before final tightening.
Step 5: Apply the Toolbox Foaming (DZ14251290020) inside the toolbox body. Remove adhesive backing and press firmly onto all interior surfaces.
Step 6: Mount the assembled toolbox body to the vehicle brackets using six M6x20 bolts (front/rear) and four M6x35 bolts (bottom). Use large washers under bolt heads.
Step 7: Tighten all fasteners to 10‑12 Nm. Verify the lid closes and locks securely. Test wire drawing release multiple times.
This Left Toolbox Body Assembly is designed for Shacman X5000 series trucks (2018‑2026, left side only). It replaces original part numbers DZ14251290010 (body only) and DZ14251290016 (lock kit). The kit is also compatible with X3000 models that use the same chassis toolbox mounting pattern. For the right side, order the Right Toolbox Body Assembly (DZ14251290018).
Reduce cab clutter: A dedicated toolbox keeps tools secure and frees up cab space for drivers.
Lower noise complaints: The foam lining eliminates rattling tools, improving driver comfort.
One‑part number kit: Simplifies inventory management. All hardware is bagged and labeled.
Global availability: Stocked in regional warehouses. Same‑day dispatch for fleet orders.
Independent Shacman X5000 Left Toolbox Body Assembly testing confirmed the toolbox body withstands 1000N point load on the lid. The lock assembly passed 15,000 key cycles without jamming. Wire Shacman X5000 Left Toolbox Body Assembly drawing assembly maintained cable tension within 5% after 5,000 actuations. Hexagon flange bolts and locknuts showed no loosening after 500 hours of vibration at 5g.
Does this kit include the gas spring for the lid? – No, the gas spring (DZ14251290080) is separate. This kit includes the lock and mounting hardware only.
Can the toolbox be mounted on the right side? – This is specifically for the left side. A right side kit (DZ14251290018) is available.
Are the keys unique or common? – Each lock assembly comes with two unique keys. Key codes are stamped for replacement ordering.
Is the foaming pre‑cut for the X5000 toolbox? – Yes, the foam pads are die‑cut to fit the exact interior contours of the left toolbox body.
What is the warranty period? – 24 months against defects. Coverage includes cracking, lock failure, corrosion, and foam deterioration.
The Shacman X5000 Left Toolbox Body Assembly complies with EU ELV Directive 2000/53/EC and RoHS 2011/65/EU. The LLDPE body is 100% recyclable and contains no heavy metals. Zinc plating uses trivalent chromium (hexavalent‑free). Foaming is made from polyurethane without CFCs. Packaging uses 95% recycled cardboard.
Quality assurance: Aftermarket tool boxes often use blow‑molded HDPE that cracks in cold weather. Genuine rotomolded LLDPE remains impact‑resistant down to -40°C.
Precision fitment: Generic lock brackets rarely align with the toolbox’s molded recesses. Genuine components use original tooling for perfect fit.
Full traceability: Each toolbox body is date‑stamped. Aftermarket products have no batch traceability, making warranty claims difficult.
We provide a 24‑month unlimited mileage warranty on the Shacman X5000 Left Toolbox Body Assembly. Coverage includes cracking of the plastic body, lock mechanism failure, cable fraying, foam delamination, and fastener corrosion. For Shacman X5000 Left Toolbox Body Assembly fleet customers, extended warranty up to 60 months is available with annual inspection. Claims processed within 48 hours. Keep original packaging for validation. This product is designed to exceed 10 years of service life.
The Shacman X5000 Left Toolbox Body Assembly is the complete OEM storage solution for your Shacman X5000 heavy truck. This all‑in‑one kit includes the rugged rotomolded toolbox body, lock assembly, wire drawing cable, noise‑reducing foam, lock bracket, and all fasteners – hexagon flange bolts, all‑metal locknuts, and large washers. Engineered for harsh environments and precision fitment, this assembly provides secure, weather‑resistant storage for your tools and gear. Whether you operate a single truck or a large fleet, choose the genuine Shacman left toolbox body assembly for durability, quiet operation, and long‑term reliability. Order today and equip your truck with factory‑grade storage in under 30 minutes.
