Center Drive Shaft
Центральный Карданный Вал
Eje de Transmisión Central
OEM Center Drive Shaft 4010101-DZ92189315173 precision‑engineered for the Shacman X5000 multi‑axle driveline system. This balanced 4010101-DZ92189315173 assembly transmits torque between the transmission and intermediate axle with reliable power transfer.
Constructed from high‑strength alloy steel with hardened splines and precision‑welded yokes, the Center Drive Shaft 4010101-DZ92189315173 withstands the torsional loads and vibration of heavy‑duty commercial vehicle operation.
Replacing a bent or worn center drive shaft with the genuine 4010101-DZ92189315173 component restores proper driveline alignment and prevents the vibration that causes premature bearing and seal failure.
| Parameter | Specification |
|---|---|
| OEM Part Number | 4010101-DZ92189315173 |
| Product Name | Center Drive Shaft |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Alloy Steel with Induction‑Hardened Splines |
| Shaft Type | Solid driveline center shaft with welded end yokes |
| Spline Specification | Involute spline at sliding joint end |
| Surface Hardness | HRC 55‑60 on bearing and spline surfaces |
| Corrosion Protection | Phosphate coating with anti‑corrosion oil film |
| Balancing | Dynamically balanced for smooth operation |
| Application | Shacman X5000 center driveline between transmission and intermediate axle |
The 4010101-DZ92189315173 center drive shaft is a critical component in the Shacman X5000 multi‑axle driveline. It transmits torque from the transmission output to the intermediate axle input through universal joints.
In multi‑axle configurations, the center drive shaft bridges the gap between the forward power unit and the rear drive axles, maintaining precise alignment while accommodating chassis flex and suspension movement.
The induction‑hardened splines and precision‑welded yokes resist the wear that occurs under high‑torque loading, maintaining secure attachment to universal joints throughout the vehicle’s service intervals.
The 4010101-DZ92189315173 shaft is manufactured from high‑strength alloy steel with induction‑hardened surfaces at the spline areas, providing excellent wear resistance for extended service life.
The phosphate coating provides corrosion protection while the anti‑corrosion oil film helps prevent fretting at the spline interfaces with the universal joint yokes during high‑torque driveline operation.
The 4010101-DZ92189315173 shaft installs between the transmission and intermediate axle with universal joint connections. Correct yoke phasing is essential to prevent driveline vibration.
Driveline angular alignment should be verified after installation to ensure operating angles at both universal joints are within specification, preventing premature joint and bearing wear during service.
Each 4010101-DZ92189315173 shaft undergoes dynamic balancing to minimize vibration at highway speeds. Correction weights are applied as needed to meet the specified balance grade for heavy‑duty applications.
Spline fit and weld integrity are verified during assembly to ensure proper function and structural reliability throughout the demanding duty cycles of commercial vehicle driveline operation.
Driveline vibration that increases with vehicle speed indicates the 4010101-DZ92189315173 shaft may be bent, out of balance, or have worn splines causing excessive runout during high‑speed rotation.
Worn or fretted splines create driveline backlash producing a clunking sound during acceleration or deceleration, requiring shaft inspection and possible replacement to prevent further damage.
During driveline service, the shaft should be inspected for straightness, spline condition, and universal joint wear. Damaged shafts must be replaced to maintain driveline reliability and vehicle safety.
The 4010101-DZ92189315173 shaft is specifically configured for the Shacman X5000 center driveline position, with spline dimensions, overall length, and balance specification matching this vehicle platform.
Fleet operators should maintain spare center drive shafts and universal joint components for prompt replacement when driveline issues are diagnosed, minimizing vehicle downtime from driveline failures.
Aftermarket center drive shafts with incorrect specifications can cause driveline vibration. We supply only the authentic Shacman X5000 Center Drive Shaft 4010101-DZ92189315173 built to OEM specifications.
Each shaft is individually packaged with protective coating and yoke guards. The part number 4010101-DZ92189315173 is clearly printed on the packaging for immediate identification and verification.
Our international logistics network ensures genuine 4010101-DZ92189315173 center drive shafts are available for dispatch to dealerships and fleet maintenance facilities worldwide.
Complete center drive shaft assembly with welded yokes, hardened splines, and dynamic balancing. Ready for driveline installation.
Expert guidance on center drive shaft installation and driveline alignment. We help ensure your 4010101-DZ92189315173 shaft provides smooth torque transmission.
For current stock availability on the genuine Center Drive Shaft 4010101-DZ92189315173, please use the contact buttons above.
