The Shacman X5000 Tool Box is a complete OEM left-side storage system for the Shacman X5000 heavy truck. This assembly provides secure, weather‑resistant storage for tools, chains, straps, and other essential equipment. The Shacman X5000 Tool Box kit includes the toolbox body, cover, brackets, hinge covers, protect plate, gas spring bracket, and all necessary fasteners – hexagon flange bolts, cross slotted screws with washers, hex nuts, and large washers. Every component is manufactured to original equipment standards for direct replacement.
| Part Number | Part Name |
|---|---|
| DZ14251290052 | Left Toolbox Rear Fixed Bracket |
| DZ14251290013 | Tool Box Hinge Cover |
| DZ14251290014 | Left Toolbox Body Assembly |
| DZ14251290028 | Right Side Protect Plate |
| DZ14251290030 | Left Toolbox Cover Assembly |
| DZ14251290005 | Set Bracket |
| DZ14251290061 | Tool Box Front Bracket |
| DZ14251290062 | Tool Box Rear Bracket |
| DZ14251290085 | Tool Box Gas Spring Bracket |
| Q1840620T1F31 | Hexagon Flange Bolt |
| Q230B0616F60 | Cross Slotted Screw And Washer |
| Q340B06F60 | Type 1 Hex Nut |
| Q402B06F60 | Large Washer |
Box material
LLDPE (rotomolded)Capacity / load rating
85 L / 50 kg distributedBracket steel thickness
2.5–3.0 mmCorrosion protection
Zinc plating / E‑coatThe Left Toolbox Body Assembly (DZ14251290014) is rotationally molded from linear low‑density polyethylene (LLDPE), providing excellent impact resistance even at -40°C. The material includes UV stabilizers for 1,000+ hours of accelerated weathering. The cover assembly uses a double‑wall injection‑molded design for rigidity without excessive weight. Brackets are stamped from HSLA steel and finished with zinc plating or E‑coat, tested to 520 hours salt spray. All fasteners meet ISO 898‑1 property class 8.8 or higher.
Step 1: Remove the old toolbox if present. Clean all mounting surfaces on the chassis rail and cab body.
Step 2: Attach the Tool Box Front Bracket (DZ14251290061) and Tool Box Rear Bracket (DZ14251290062) to the cab using the four Hexagon Flange Bolts (Q1840620T1F31). Torque to 12 Nm.
Step 3: Install the Left Toolbox Rear Fixed Bracket (DZ14251290052) onto the chassis rail using M8 bolts (not included, reuse original).
Step 4: Position the Left Toolbox Body Assembly (DZ14251290014) onto the brackets. Secure using the Set Bracket (DZ14251290005) and the included cross slotted screws, hex nuts, and large washers.
Step 5: Install the Right Side Protect Plate (DZ14251290028) on the right side of the toolbox using three screws and nuts.
Step 6: Attach the Tool Box Gas Spring Bracket (DZ14251290085) to the toolbox cover assembly, then mount the gas spring (sold separately) between the bracket and the toolbox body.
Step 7: Install the Left Toolbox Cover Assembly (DZ14251290030) onto the toolbox body using the two Tool Box Hinge Covers (DZ14251290013) and remaining screws.
Step 8: Test lid operation, apply padlock to hasp if desired, and verify no interference with cab movement.
This Shacman X5000 Tool Box is designed specifically for the left (driver) side of Shacman X5000 series trucks (all years 2018‑2026). It replaces original part numbers DZ14251290010 (toolbox body) and DZ14251290020 (cover). The kit is also compatible with X3000 models that share the same chassis mounting pattern. For the right side, a separate toolbox (DZ14251290015) is available. This left toolbox is not compatible with X6000 or earlier F series trucks.
Reduce loose cargo: A dedicated toolbox keeps chains, binders, and tools secure and organized, reducing cab clutter and potential load shift hazards.
Weather‑resistant storage: The sealed cover and drain holes protect contents from rain, snow, and road spray. LLDPE will not rust or corrode.
One‑kit replacement: All brackets and fasteners are included, eliminating the need to source separate components. Average installation time 45 minutes.
Global availability: Stocked in regional warehouses. Same‑day dispatch for urgent fleet orders. Volume discounts for orders of 10+ kits.
Independent testing confirmed the Shacman X5000 Tool Box body withstands 500N point load on the lid without cracking. The hinges passed 10,000 open/close cycles with no wear. Bracket assemblies maintained alignment after 50,000 vibration cycles at 5g. The weather seal kept internal compartment dry during 300mm/h simulated rain for 2 hours.
Does this kit include the gas spring (strut) for the lid? – No, the gas spring (Shacman part DZ14251290080) is sold separately. The kit includes the gas spring bracket (DZ14251290085) and all mounting hardware.
Can this toolbox be mounted on the right side? – This kit is specifically for the left (driver) side. A mirror‑image right toolbox assembly (DZ14251290015) is available separately.
What is the load capacity of the toolbox? – Maximum recommended load is 50 kg (110 lbs) evenly distributed. The brackets are rated for 75 kg, but the lid and hinges are rated for 50 kg.
Are the cross slotted screws self‑tapping? – No, they are machine screws intended for use with the provided Type 1 Hex Nuts and Large Washers. Pre‑drilled holes in the toolbox body accept these screws.
What is the warranty period? – 24 months against defects in materials or workmanship, including cracking, fading, corrosion, and fastener failure.
The Shacman X5000 Tool Box complies with EU ELV Directive 2000/53/EC and RoHS 2011/65/EU. The LLDPE body is 100% recyclable and contains no heavy metals. Brackets use trivalent zinc plating (no hexavalent chromium). Packaging uses 95% recycled cardboard. At end‑of‑life, the plastic can be recycled into industrial products, and steel components can be scrapped.
Quality assurance: Aftermarket tool boxes often use blow‑molded HDPE that cracks in cold weather. Genuine rotomolded LLDPE remains impact‑resistant down to -40°C.
Precision fitment: Generic brackets frequently have misaligned holes, requiring drilling. Genuine brackets are CNC‑formed from original Shacman tooling, ensuring perfect alignment.
Full traceability: Each toolbox body is date‑stamped and batch‑coded, enabling quality tracking. Aftermarket products have no such traceability.
We offer a 24‑month unlimited mileage warranty on the Shacman X5000 Tool Box. Coverage includes cracking of the plastic body, corrosion of brackets, failure of hinges, and fastener thread stripping. For fleet customers, extended warranty up to 60 months is available with annual inspection. Claims are processed within 48 hours through our global distributor network. Keep the original packaging and proof of purchase for validation. This product is designed to exceed 10 years of service life. Individual components (hinge covers, screws, washers, nuts) are available as service parts.
The Shacman X5000 Tool Box is the complete, all-in-one storage solution for your Shacman X5000 heavy truck. This OEM kit includes the rugged rotomolded toolbox body, weather‑sealed cover assembly, all mounting brackets, hinge covers, protect plate, gas spring bracket, and every fastener required – hexagon flange bolts, cross slotted screws with washers, hex nuts, and large washers. Engineered for harsh environments and precision fitment, this toolbox keeps your tools secure and accessible. Whether you operate a single truck or a large fleet, choose the genuine Shacman X5000 Tool Box for durability, safety, and long‑term value. Order today and equip your truck with factory‑grade storage in under one hour.
