Transition Bracket
Переходной Кронштейн
Soporte Adaptador
OEM Transition Bracket DZ96259544051 precision‑formed for the Shacman X5000 chassis system. This versatile DZ96259544051 adapter plate bridges different component mounting patterns, enabling secure attachment where direct interfaces are incompatible.
Fabricated from high‑strength steel with durable anti‑corrosion coating, the Transition Bracket DZ96259544051 provides a rigid mounting platform that maintains precise alignment under vibration and dynamic loading.
Replacing a damaged or deformed bracket with the genuine DZ96259544051 component restores proper component fitment and prevents the misalignment that stresses connected systems.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ96259544051 |
| Product Name | Transition Bracket |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Steel with Black E‑coat Finish |
| Bracket Type | Formed adapter plate with reinforcement ribs |
| Primary Mounting Pattern | 4‑hole pattern, 10.50 mm diameter |
| Secondary Mounting Pattern | 3‑hole pattern, 8.50 mm diameter |
| Material Thickness | 5.00 mm |
| Corrosion Protection | Electrophoretic coating, 480 hours salt spray rated |
| Application | Shacman X5000 component mounting interface adapter |
The DZ96259544051 transition bracket solves a common engineering challenge: connecting components with different bolt patterns. Its two distinct mounting patterns enable secure attachment of incompatible interfaces.
In heavy truck manufacturing, various suppliers provide subsystems with proprietary mounting dimensions. This bracket adapts these patterns to the Shacman X5000 chassis without requiring modifications to either component.
The Transition Bracket DZ96259544051 also serves as a structural spacer, offsetting mounted components to provide clearance for adjacent systems such as exhaust pipes, wiring harnesses, or fluid lines.
The DZ96259544051 bracket is stamped from 5‑millimeter thick high‑strength steel with reinforcement ribs that provide rigidity while minimizing weight. The e‑coat finish provides uniform corrosion protection.
The electrophoretic coating penetrates into all surfaces including internal holes and edges, providing comprehensive protection against the moisture and road salt encountered in under‑chassis service.
The DZ96259544051 bracket is installed by first bolting it to the primary component using the 4‑hole pattern, then attaching the secondary component to the 3‑hole pattern. All bolts must be torqued to specification.
The bracket should be oriented according to the service manual to ensure correct offset direction and adequate clearance for surrounding components and service access.
Each production batch of DZ96259544051 brackets undergoes dimensional inspection using coordinate measuring equipment to verify hole positions and overall geometry against specifications.
Coating thickness and adhesion testing ensure the e‑coat finish meets durability requirements for long‑term chassis service in demanding environmental conditions.
Rust staining or coating delamination on the DZ96259544051 bracket indicates corrosion has compromised the e‑coat layer. If unchecked, this reduces the effective material thickness.
Cracks at bolt holes or along reinforcement ribs indicate fatigue. Cracked brackets must be replaced immediately to prevent component detachment during vehicle operation.
During chassis inspections, transition brackets should be checked for tightness and condition. Loose bolts allow movement that elongates holes and accelerates bracket wear.
The DZ96259544051 bracket is specifically configured for designated mounting interfaces on the Shacman X5000, with bolt patterns matching the factory‑specified component attachment points.
Fleet workshops should maintain spare transition brackets for replacement when damage or corrosion is discovered during component service or chassis inspections.
Aftermarket brackets with incorrect hole patterns can cause misalignment. We supply only the authentic Shacman X5000 Transition Bracket DZ96259544051 built to OEM dimensional specifications.
Each bracket is individually packaged with protective wrapping. The part number DZ96259544051 is clearly printed on the packaging for immediate identification.
Our international logistics network ensures genuine DZ96259544051 transition brackets are available for dispatch to dealerships and fleet facilities worldwide.
Single transition bracket with e‑coat finish and dual mounting patterns. Mounting hardware available separately for installation.
Expert guidance on transition bracket installation and component alignment. We help ensure your DZ96259544051 bracket provides secure mounting.
For current stock availability on the genuine Transition Bracket DZ96259544051, please use the contact buttons above.
