Transition Bracket for Heat Shield
Переходной Кронштейн
Soporte Adaptador
OEM Transition Bracket for Heat Shield DZ96259542650 precision‑formed for the Shacman X5000 engine compartment. This specialized DZ96259542650 adapter bridges thermal shields to their mounting points, ensuring correct positioning and air gap maintenance.
Fabricated from high‑strength steel with heat‑resistant coating, the Transition Bracket for Heat Shield DZ96259542650 withstands exhaust temperatures while maintaining structural integrity under continuous engine vibration.
Replacing a cracked or loose bracket with the genuine DZ96259542650 component restores proper heat shield alignment and prevents the shield contact that causes rattles and thermal protection gaps.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ96259542650 |
| Product Name | Transition Bracket for Heat Shield |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Steel with Heat‑Resistant Coating |
| Bracket Type | Formed steel adapter with welded reinforcement |
| Engine Mounting Holes | 2 holes, 8.50 mm diameter |
| Shield Mounting Points | 3‑point pattern with vibration grommets |
| Maximum Temperature | Up to 500°C ambient exposure |
| Corrosion Protection | Heat‑resistant coating, 400 hours salt spray rated |
| Application | Shacman X5000 heat shield to engine mounting interface |
The DZ96259542650 transition bracket serves as the critical interface between thermal protection shields and the engine structure. It positions heat shields at the precise offset required for effective radiant heat reflection.
Proper heat shield positioning requires maintaining a specific air gap between the shield and hot exhaust components. This bracket’s formed geometry establishes that gap while providing rigid vibration‑resistant support.
The Transition Bracket for Heat Shield DZ96259542650 also accommodates differential thermal expansion between the engine and the shield, preventing the stress buildup that could crack either component.
The DZ96259542650 bracket is formed from high‑strength steel with welded reinforcement at stress points. The heat‑resistant coating maintains its protective properties despite radiated exhaust heat.
Vibration‑resistant mounting grommets at the shield attachment points isolate the heat shield from engine vibrations, preventing the fatigue cracking that rigid connections would cause.
The DZ96259542650 bracket mounts to designated bosses on the engine using high‑strength bolts. The heat shield then attaches to the bracket’s three mounting points with grommets.
After installation, shield position must be verified to ensure no contact with surrounding components throughout the engine’s range of motion on its rubber mounts.
Each production batch of DZ96259542650 brackets undergoes dimensional inspection to verify mounting hole positions, bracket angles, and overall geometry against engineering specifications.
The heat‑resistant coating is tested for adhesion and thermal stability, ensuring it remains bonded to the steel substrate through repeated exposure to engine compartment temperatures.
Cracks visible at weld joints or mounting holes of the DZ96259542650 bracket indicate fatigue damage. Cracked brackets must be replaced immediately to maintain heat shield security.
A loose or rattling heat shield may indicate that mounting grommets have hardened or failed, allowing the shield to vibrate against the bracket or engine surfaces.
During engine service, brackets should be inspected for integrity, coating condition, and secure attachment. Replacing compromised brackets maintains the thermal protection system.
The DZ96259542650 bracket is specifically designed for the Shacman X5000 heat shield configuration and engine mounting points, matching factory‑specified interface geometry.
Fleet workshops should inspect these brackets during engine services and maintain spares for prompt replacement when damage or corrosion is discovered.
Aftermarket brackets with incorrect geometry can misalign heat shields, reducing protection. We supply only the authentic Shacman X5000 Transition Bracket for Heat Shield DZ96259542650.
Each bracket is individually packaged with protective wrapping. The part number DZ96259542650 is clearly printed on the packaging for immediate identification.
Our international logistics network ensures genuine DZ96259542650 transition brackets are available for dispatch to dealerships and fleet facilities worldwide.
Complete transition bracket with integrated grommets. Ready for installation onto engine mounting points.
Expert guidance on bracket installation and heat shield alignment. We help ensure your DZ96259542650 bracket provides secure thermal shield mounting.
For current stock availability on the genuine Transition Bracket for Heat Shield DZ96259542650, please use the contact buttons above.
