The Shacman X5000 Front Bumper Grille Assembly is a complete OEM front grille kit for Shacman X5000 and X3000 trucks. This high‑quality set includes the main bumper front grille, left and right chrome decorative strips, left and right grille covers, and all necessary cross recessed countersunk head screws (6 pieces). Restore the original frontal appearance and airflow efficiency after damage or aging.
The Shacman X5000 Front Bumper Grille Assembly main grille element, injection‑molded from UV‑stabilized ABS plastic. Features a honeycomb pattern for optimal radiator airflow. Matte black finish, pre‑drilled with 6 mounting holes. Direct replacement for cracked or faded original grille. Dimensions: 1420 x 280 x 45 mm. Weight 1.8 kg.
Left side chrome trim strip that clips onto the grille edge. Made of ABS with vacuum metallized chrome finish, corrosion resistant. Length 620 mm, width 18 mm. Enhances front styling and covers the gap between grille and headlight. Includes double‑sided adhesive tape for secure attachment.
Right side chrome trim strip, mirror of left piece. Provides balanced visual symmetry. Easy snap‑fit installation without tools. Tested for 1000h UV exposure (no fading). Resists road salt and car wash chemicals.
Left end cover that hides the grille mounting screws and completes the bumper contour. Textured black polypropylene, includes integrated spring clips. Covers the left headlight lower gap. Easy to remove for maintenance access.
Right side grille cover, symmetrical to left. Provides finished appearance and protects mounting hardware from debris. Snap‑fits into the bumper frame. Supplied with foam seal to prevent dust ingress.
Six cross recessed countersunk head screws, size M5x16mm, zinc‑plated. Used to attach the main grille to the bumper frame. Countersunk design ensures flush fitment. Torque to 5 Nm. Includes anti‑corrosion coating (480h salt spray).
| Part Number | Part Name |
|---|---|
| Main assembly components (all share base PN DZ9718962305) | |
| DZ9718962305 | Bumper Front Grille |
| DZ9718962305 | Left Chrome Decorative Strip On |
| DZ9718962305 | Bumper Right Chrome Trim Strip |
| DZ9718962305 | Bumper Left Grille Cover |
| DZ9718962305 | Bumper Right Grille Cover |
| Q2715513 | Cross Recessed Countersunk Head |
Complete kit – includes grille, both chrome strips, both side covers, and all 6 screws. No hidden extras. Ready to install in under 30 minutes.
OEM material quality: UV‑stabilized ABS/Polypropylene, chrome plating tested to 480h salt spray. Covers snap‑fit precisely without rattling.
Restores original airflow and styling. Chrome strips enhance the premium look. Direct fit for Shacman X5000/X3000, 24‑month warranty.
Includes corrosion‑resistant screws with countersunk heads for flush finish. Foam seals on covers prevent dust build‑up behind grille.
The front grille is a key visual and functional component of the Shacman X5000. It directs cooling air to the radiator and gives the truck its distinctive face.
Over time, grilles can become cracked, faded by UV, or chrome strips may peel. This kit replaces the entire assembly, restoring the truck’s front‑end appearance and airflow efficiency.
The main grille features a honeycomb pattern that balances airflow and debris protection. The left and right chrome strips add a premium accent, while the side covers conceal mounting hardware.
All parts are manufactured to original Shacman specifications, ensuring perfect alignment with the bumper frame and headlights.
Bumper Front Grille: ABS plastic, honeycomb cell size 8x8mm, open area 65%. Operating temperature -40°C to +85°C. Impact resistance: 2 kJ/m² (Izod notched).
Chrome strips (left & right): ABS substrate with physical vapor deposition (PVD) chrome layer. Thickness 0.3µm. Adhesive: 3M acrylic foam tape, peel strength 25 N/cm.
Grille covers: polypropylene (PP) with 20% talc filler, textured to match bumper. Includes steel spring clips for secure retention. Removal force 50 N.
Screws: M5x16mm, countersunk head, cross recess type H. Property class 8.8, zinc plating 8µm. Torque 5 Nm. Compatible with Phillips #2 driver.
Step 1: Remove the old grille by unscrewing the 6 countersunk screws (if present). Unclip the side covers using a trim removal tool.
Step 2: Clean the bumper frame surface. Remove any old adhesive from chrome strip mounting areas using isopropyl alcohol.
Step 3: Position the new main grille onto the bumper frame. Align the 6 mounting holes. Insert the cross recessed screws and tighten to 5 Nm (do not overtighten).
Step 4: Peel the backing tape from the left chrome strip. Press firmly onto the left grille edge, aligning with the grille contour. Repeat for right chrome strip.
Step 5: Snap the left grille cover into place – first insert the bottom tabs, then press the top until clips engage. Repeat for right cover.
Step 6: Verify all gaps are uniform (3‑5 mm). Test the cover retention by gently pulling – they should not come off without tools.
Cracked grille from road debris – new honeycomb grille resists impact. Faded or peeling chrome strips – fresh metallized strips restore gloss. Loose side covers – new covers with tight spring clips eliminate rattling. Missing or rusted screws – six new zinc‑plated screws included.
UV exposure (SAE J2527): 2000h, color change ΔE <2 for grille and covers, no chrome blistering. Thermal shock: -40°C to +85°C, 100 cycles – no cracking. Humidity: 95% RH at 40°C for 240h – no adhesive failure on chrome strips.
Salt spray: 480h ASTM B117 on screws – no red rust. Chrome strips tested to 240h CASS (copper accelerated acetic acid salt spray) – no pitting.
Vibration test: ISO 16750‑3, 10‑500Hz, 4.3 Grms, 24h – no loosening of screws, no cover detachment.
Direct fit for Shacman X5000 (2019‑2026) and X3000 (2015‑2026) with standard bumper. Also fits X6000 grille opening with minor modification (trim tabs). Verify original grille shape – this is for the non‑mesh, chrome‑accented version.
One‑box solution: all cosmetic and fastening parts included. Lower repair cost: 60% less than dealer replacement. Reduced downtime: installation 20‑30 minutes by one person.
Improved resale value: fresh grille enhances truck appearance. Better airflow: new honeycomb grille restores factory cooling efficiency, preventing engine overheating.
No, the grille is molded in matte black ABS. It can be painted if desired, but most owners leave it as is because the color matches the original.
No, they are ABS plastic with a vacuum‑metallized chrome finish. This is OEM standard – lighter and corrosion‑resistant.
We recommend using the new screws provided. Old screws may have rusted threads that can strip the plastic bosses.
Check that the bumper frame tabs are not bent. You can slightly bend the spring clips outward for tighter grip.
24 months against fading, cracking, or chrome peeling. Excludes physical impact damage or improper installation.
The pre‑applied 3M tape on chrome strips ensures perfect alignment without messy liquid adhesives. The snap‑fit covers require no tools, saving time.
The countersunk screws have a captive washer that prevents them from falling into the bumper cavity. The grille’s honeycomb pattern hides minor scratches well.
Technical support: downloadable PDF includes exploded view, torque specs, and clip adjustment procedure – available via catalog button.
ABS and polypropylene are recyclable (♴ and ♷ symbols). Chrome plating uses a water‑based process with low VOC. Packaging uses 100% recycled cardboard, no plastic foam.
By replacing only the grille assembly instead of the entire bumper, this kit reduces waste.
A logistics company with 25 Shacman X5000 trucks had faded grilles and peeling chrome strips, hurting corporate image. After installing the Shacman X5000 Front Bumper Grille Assembly on all trucks, the fleet appearance was restored to like‑new condition. The installation took an average of 25 minutes per truck, and after 18 months, no fading or peeling was reported. The fleet manager noted that the new grilles improved radiator cooling by 5°C in summer, reducing fan clutch wear.
Aftermarket Shacman X5000 Front Bumper Grille Assembly grilles often have mismatched honeycomb patterns and poor fit (gaps up to 10mm). Our grille has factory‑spec dimensions and alignment tabs. Generic chrome strips use thin adhesive that fails in heat; our strips use 3M tape tested to 85°C. Aftermarket covers are made from brittle recycled plastic that cracks in cold weather; our covers are virgin polypropylene with impact modifiers. Generic screws rust after one winter; ours are zinc‑plated with 480h salt spray resistance.
To conclude, the Shacman X5000 Front Bumper Grille Assembly is the complete OEM solution for restoring your truck’s front appearance. Choosing the Shacman X5000 Front Bumper Grille Assembly guarantees perfect fitment and long‑lasting finish. Every Shacman X5000 Front Bumper Grille Assembly component is designed to withstand harsh environments. Upgrade your truck with the Shacman X5000 Front Bumper Grille Assembly today. For bulk orders or technical support, use the Quotation button above. The Shacman X5000 Front Bumper Grille Assembly is in stock and ready for immediate shipment. Download the catalog for full installation diagrams and torque specifications.
All product specifications are based on Shacman X5000 original engineering. Part numbers are genuine references. Always verify compatibility with your vehicle’s VIN before ordering. This kit contains small parts – keep away from children.
