Telescopic Transmission Shaft
Телескопический Карданный Вал
Eje de Transmisión Telescópico
OEM Telescopic Transmission Shaft/47000Nm/180/Expansion length110/length=2040 DZ9114315204 precision‑engineered for the Shacman X5000 driveline system. This robust DZ9114315204 telescopic shaft transmits up to 47000 Nm of torque while accommodating dynamic length changes during vehicle operation.
Featuring a slip‑yoke design with 110 mm expansion capacity and 2040 mm installed length, the Telescopic Transmission Shaft DZ9114315204 provides reliable power transfer between the transmission and rear axle under all operating conditions.
Replacing a worn or damaged telescopic shaft with the genuine DZ9114315204 assembly restores proper driveline function and prevents the vibration and noise caused by excessive spline wear or imbalance.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ9114315204 |
| Product Name | Telescopic Transmission Shaft |
| Brand / Model | Shacman X5000 |
| Maximum Torque Capacity | 47000 Nm |
| Expansion Length | 110.00 mm slip capacity |
| Installed Length | 2040.00 mm |
| Flange Diameter | 180.00 mm end yoke flange |
| Spline Type | Involute slip spline with grease retention |
| Balancing | Dynamically balanced for high‑speed operation |
| Application | Shacman X5000 transmission to rear axle telescopic driveline |
The DZ9114315204 telescopic transmission shaft is a critical driveline component that connects the transmission output to the rear axle input. It transmits engine torque through universal joints while accommodating length changes.
As the rear axle moves vertically through suspension travel, the distance between the transmission and axle changes. The telescopic slip‑yoke design with 110 millimeters of expansion allows the shaft to extend and retract smoothly.
With a torque rating of 47000 Nm and 180‑millimeter flange diameter, the Telescopic Transmission Shaft DZ9114315204 is engineered to handle the extreme power output of the Shacman X5000 under maximum load conditions.
The DZ9114315204 shaft features an involute slip spline with an integrated grease retention system that keeps the sliding joint lubricated, minimizing wear and preventing corrosion at the telescopic interface.
The 180‑millimeter end yoke flanges provide robust connection points for the universal joint assemblies, distributing torque evenly through the flange bolt pattern at each end of the driveshaft.
The DZ9114315204 shaft installs between the transmission output flange and rear axle input flange. Universal joint yokes must be correctly phased to prevent driveline vibration during rotation.
The slip joint should be lubricated with the specified grease during installation. Flange bolts must be tightened to the correct torque specification to ensure secure attachment under high‑torque operation.
Each DZ9114315204 shaft undergoes dynamic balancing to minimize vibration at highway speeds. Correction weights are applied as needed to meet the specified balance grade for heavy‑duty driveline applications.
Spline fit and slip force are verified during assembly to ensure smooth telescopic action without excessive free play or binding that could cause driveline noise or premature wear in service.
Driveline vibration that increases with speed indicates the DZ9114315204 shaft may be out of balance, have worn universal joints, or have excessive slip spline clearance causing runout during rotation.
A clunking sound during acceleration or deceleration suggests worn slip splines creating driveline backlash, requiring shaft inspection and possible replacement to prevent further component damage.
During driveline service, the slip joint should be inspected for grease condition and spline wear. The universal joints should be checked for smooth operation without binding or excessive free play.
The DZ9114315204 shaft is specifically configured for the Shacman X5000 driveline with 2040‑millimeter length, 180‑millimeter flange diameter, and 47000 Nm torque capacity matching this vehicle platform.
Fleet operators should maintain spare telescopic shafts and universal joint components for prompt replacement when driveline issues are diagnosed, minimizing vehicle downtime from driveline failures.
Aftermarket telescopic shafts with incorrect balance or spline specifications can cause driveline vibration. We supply only the authentic Shacman X5000 Telescopic Transmission Shaft DZ9114315204 built to OEM specifications.
Each shaft is individually packaged with protective flange covers and corrosion inhibitor. The part number DZ9114315204 is clearly marked on the component and packaging for identification.
Our international logistics network ensures genuine DZ9114315204 telescopic transmission shafts are available for dispatch to dealerships and fleet maintenance facilities across all major continents.
Complete telescopic transmission shaft assembly with slip yoke, end flanges, and dynamic balancing. Ready for driveline installation.
Expert guidance on telescopic shaft installation and driveline alignment. We help ensure your DZ9114315204 shaft provides smooth, reliable torque transmission.
For current stock availability on the genuine Telescopic Transmission Shaft DZ9114315204, please use the contact buttons above.
