Shacman X5000 Assembly Parts is the complete OEM hardware and trim component kit for X5000 cab assembly and refurbishment. This comprehensive collection includes trim panels, fasteners, sealing tapes, plugs, clips, rivet nuts, and much more — everything required to maintain a factory‑fresh interior and secure assembly.
The Shacman X5000 Assembly Parts range covers door inner panel blockings, decorative side panels, A‑pillar trim assemblies, upper sealing strips, rivet nuts of various sizes, plastic clips, cross slotted screws, blanking caps, cloth base sealing tapes, butyl adhesive tape, plastic plugs, height valve cross beams, and full wiper cover trim panels.
Engineered to Shacman’s strict OEM tolerances, each part guarantees perfect fit, lasting durability, and rattle‑free performance even in the harshest operating environments — from arctic cold to desert heat. Trust genuine Shacman Assembly Parts for collision repair, fleet maintenance, and complete interior restoration.
Plastic plug for door inner panel holes, 35mm diameter. Seals access holes against dust and moisture. Push‑fit design, reusable. Six pieces supplied.
Left side interior decorative panel, textured ABS, color‑matched to X5000 interior. Covers wiring and provides finished look. Includes mounting bosses for secure attachment.
Cross‑slotted pan head screw with captive washer. Used for trim and panel attachment. Prevents washer loss, zinc‑plated for corrosion resistance. Multiple lengths available.
PVC blanking plug, 25mm diameter. Seals unused holes in firewall or floor pan. Flexible material, snap‑fit retention. Two pieces included.
Nylon push‑type trim clip (14 pcs). Secures door panels and side trims. Reusable, vibration‑damping. 8mm hole size. High retention force, easy to remove.
Self‑tapping screw with integrated flat washer. For plastic and sheet metal assembly. Cross recess drive, zinc finish. Several lengths supplied.
Left A‑pillar trim for JD/19 cab version. Covered with fabric or vinyl. Includes clip mounts. Direct OEM replacement, reduces wind noise by up to 3dB.
Hex body rivet nut, M6 thread x 21mm. Steel, 8‑ST strength. For blind mounting in sheet metal. Creates threaded hole where access is limited.
Right side wall trim panel, mirror of left side. Covers insulation and wiring. Lightweight, easy to remove for service access.
EPDM rubber sealing strip for roof‑to‑side panel joint. Prevents water ingress and wind noise. Push‑on installation, flexible at -40°C.
Polyethylene plug, 8.3×11‑13mm. Seals small holes in interior trim. Black, low‑profile. Snap‑fit design.
Blanking cap for 11mm holes. Used on dashboard and trim. Push fit, flexible wings. UV‑stabilized.
General purpose blanking cap. Covers unused switch holes. Matches interior texture, snap‑fit.
M6 rivet nut, 13mm length, QST36.6 material, A3A coating. For thin‑walled sections. High pull‑out resistance. Twelve pieces supplied.
Cloth‑backed adhesive tape, 50x90mm. Seals large irregular holes. Resists moisture and abrasion. Peel‑and‑stick application.
Vinyl sticker, 30mm diameter. Seals small holes against dust. Easy to apply, removable. Black or body color.
M8 rivet nut, 15.5mm length, steel. For heavy‑duty blind fastening. Used for seat belt or bracket mounts.
General purpose plastic plug. Seals unused mounting holes. Black finish, snap‑fit retention.
Butyl rubber tape, non‑hardening. Seams and joints seal. Remains flexible. Ideal for HVAC and firewall applications.
All‑metal hex lock nut, Type 2, M10 thread. Prevailing torque design, zinc plated. Resists loosening under vibration. Reusable up to 5 times.
PVC plug, 38mm diameter, PAL9011 color. For floor pan holes. Weather‑resistant, snap‑in retention.
Cross beam for height valve mounting. Steel weldment, powder coated. Includes brackets and isolators. Supports air suspension leveling system.
Right‑hand drive wiper motor cover trim. Fits over wiper linkage. Acoustic foam backing. Reduces noise from wiper mechanism.
Lower windshield interior trim. Covers defroster duct and wiring. Snap clips included. Matches dashboard grain.
Cloth tape, 40mm diameter round patches. Seals large round holes. Adhesive backing, high tack. Eighteen pieces supplied.
Steel connecting plate for structural joints. Zinc plated. Used in door or frame assembly. Pre‑drilled holes. Four pieces included.
Elongated plastic blockage for slots or elongated holes. Snap fit, flexible. Seals against dust and moisture.
Aluminum alloy shim, 11x50x15mm. For adjusting gaps in door or frame. Corrosion resistant.
Plastic spacing block, 2 pieces. Creates consistent gap between panels. Push‑in mounting.
M8 rivet nut, 28.7mm length, with PUR coating. For high‑strength blind fastening. Corrosion protected. Eighteen pieces supplied.
Standard flat washer, M10 size. Hardened steel, zinc plated. Distributes bolt load.
Right A‑pillar interior trim. Matches left side. Includes clip holes and acoustic padding. Color‑matched to X5000 interior.
| Part Number | Part Name |
|---|---|
| DZ14251970050 | Door Inner Panel Blocking Φ35 |
| DZ14251971011 | Left Side Panel Decorative |
| Q230B0620F60 | Cross Slotted Screw And Washer |
| DZ14251970023 | PVC Blockage Φ25 |
| DZ14251970009 | Plastic Clip |
| Q221B4216F60 | Cross Recessed Pan Head Tapping Screw And Flat Washer Assembly |
| DZ14251110561 | Left A-Pillar Trim Panel Assembly/JD/19 Model |
| 06.13169.0010 | Hexagon Rivet Nut/M6X21,8-ST |
| DZ14251971012 | Right Side Wall Decorative |
| DZ14251970045 | Upper Sealing Strip |
| 81.96002.0142 | Plug/8.3*11-13-PE-SW |
| DZ14251970035 | Blanking Cap/ Φ 11 |
| DZ14251970025 | Blanking Cap |
| 06.13169.0012 | Riveted Nut/AM6*13-QST36.6-A3A |
| DZ14251970028 | Cloth Base Blocking Tape 50×90 |
| DZ14251970051 | Blocking Sticker Φ Thirty |
| 06.13169.0013 | Riveted Nut/M8*15.5-ST |
| 81.96002.0154 | Plug |
| DZ14251970026 | Butyl Adhesive Blocking Tape |
| Q33210T2F3 | 2 Type All Metal Hexagonal Lock |
| 81.96002.0308 | Plug/B38-PVC-PAL9011 |
| DZ13241970006 | Cross Beam Assembly/Height Valve |
| DZ14251111553 | Wiper Cover Trim Panel/X5000/RHD |
| DZ14251970018 | Front Windshield Lower Trim Panel |
| DZ14251970027 | Cloth Base Blocking Tape Φ Forty |
| 81.97487.5027 | Connecting Plate |
| 81.96410.0502 | Long Blockage |
| 81.90714.0349 | Shim 11 * 50 * 15-Alcumgpb37 |
| DZ15221433015 | Spacing Block |
| Q230B0616F60 | Cross Slotted Screw And Washer |
| 06.13169.0011 | Riveted Nut/AM8*28.7-ST/PUR-A3R |
| Q401B10 | Flat Washer |
| DZ14251110562 | Right A-Pillar Trim Panel |
Complete vehicle coverage – From A‑pillar trims to sealing plugs, every fastener and clip is included. The Shacman X5000 Assembly Parts range supports full cab rebuilds and interior refurbishments.
OEM corrosion protection – All metal fasteners are zinc‑plated or galvanized. Pass 500h salt spray. No premature rust even in harsh winter conditions.
Rattle elimination – Plastic clips and foam‑backed trim panels prevent squeaks and rattles. Restore factory‑quiet interior on any X5000 cab.
Easy installation – Every part is designed for simple snap‑fit or screw attachment. No special tools needed. Complete hardware kit saves workshop time.
Precision fit – All dimensions match factory drawings. No trimming or modifications required. Guaranteed interchangeability with original parts.
Service-friendly – Clips and screws are reusable. Tapes remove cleanly without residue. Rivet nuts can be replaced without welding.
Global availability – All 33+ part numbers stocked regionally. Rapid dispatch for urgent repairs minimizes vehicle downtime.
Durability validated – 100,000km road test, 2000h vibration test. No loosening or seal failure. OEM certified for all X5000 cab variants.
Dimensions summary – Plugs: Φ11‑Φ40mm. Rivet nuts: M6‑M8. Screws: M4‑M6. Trim panels: various sizes up to 1.2m. Total kit weight approx 8.5kg.
Eco-friendly – Recyclable plastics and metals. Low‑VOC adhesives. Reduced packaging waste.
Shacman X5000 Assembly Parts is the only genuine source for every clip, screw, trim panel, and seal in your X5000 cab. Order any part number listed above. The Shacman X5000 Assembly Parts range ensures perfect restoration of factory fit and finish. Trust Shacman original parts for long‑term reliability and driver satisfaction.
Each Shacman X5000 Assembly Parts component is available individually or as a full kit. Contact your authorized Shacman dealer for bulk ordering. Upgrade your cab with genuine quality that lasts.
Compatibility: All parts fit Shacman X5000 models (2018+, RHD/LHD, sleeper/day cab). Some parts also fit X3000 variants; check cross‑reference before ordering.
Ordering information: Minimum order 1 piece per part number. Bulk discounts for fleet quantities. Contact local distributor for up‑to‑date pricing.
Service life: Metal fasteners: vehicle lifetime. Plastic clips: 10+ years. Adhesive tapes: 5‑7 years. Replacement parts always available through the global Shacman network.
Packaging: Each part individually labeled in poly bag or box. Bulk packaging for large orders. Includes installation QR code linking to video tutorials.
Authenticity: Look for holographic Shacman genuine label. Counterfeit parts may cause fitment issues or premature failure. Always buy from certified Shacman distributors.
Customer support: Technical drawings and torque specs available on request. Genuine Shacman X5000 Assembly Parts come with 12‑24 month warranty depending on component type.
