X3000 Central Air Filter Intake Flat Pipe Sub Assembly
Впускной Патрубок Фильтра
Tubo Plano de Admisión
OEM X3000 Central Air Filter Intake Flat Pipe Sub Assembly DZ91149190014 precision‑formed for the Shacman X5000 air induction system. This essential DZ91149190014 duct section channels filtered air from the central air cleaner to the turbocharger intake.
Constructed from high‑density polymer with smooth internal bore design, the X3000 Central Air Filter Intake Flat Pipe Sub Assembly DZ91149190014 minimizes airflow restriction while resisting under‑hood temperatures and vibration.
Replacing a cracked or deformed intake pipe with the genuine DZ91149190014 component ensures the engine receives the clean, unrestricted airflow required for proper combustion and turbocharger performance.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ91149190014 |
| Product Name | X3000 Central Air Filter Intake Flat Pipe Sub Assembly |
| Brand / Model | Shacman X5000 |
| Material | High‑Density Polyethylene with Glass Fiber Reinforcement |
| Pipe Profile | Flat oval cross‑section for space efficiency |
| Connection Type | Hose couplers with clamp retention at both ends |
| Overall Length | Approximately 520.00 mm |
| Operating Temperature | -40°C to +120°C |
| Corrosion Resistance | Inherently corrosion‑free polymer construction |
| Application | Shacman X5000 central air filter to turbocharger intake duct |
The DZ91149190014 intake flat pipe forms a critical section of the Shacman X5000 clean air duct between the central air filter housing and the turbocharger compressor inlet. It delivers filtered air for combustion.
The flat oval profile allows this duct to fit within the confined space of the engine compartment while maintaining the cross‑sectional area needed for unrestricted airflow at maximum engine output.
Any leak in this duct allows unfiltered air containing abrasive dust particles to enter the turbocharger and engine, causing accelerated wear on compressor blades, cylinder walls, and piston rings.
The DZ91149190014 pipe is molded from high‑density polyethylene with glass fiber reinforcement, providing the strength to resist collapse under turbocharger suction while maintaining dimensional stability.
The polymer material is inherently corrosion‑free and resists the under‑hood chemicals, oils, and temperature extremes that cause metal intake pipes to rust or degrade over time.
The DZ91149190014 pipe connects to the air filter outlet and turbocharger inlet using flexible hose couplers and constant‑tension clamps. Couplers must be fully seated before tightening.
The intake system should be inspected for cracks, loose connections, or damaged seals during engine service. Any air leak after the filter element bypasses filtration and contaminates the engine.
Each production batch of DZ91149190014 pipes undergoes dimensional inspection to verify connection diameters, overall length, and cross‑sectional profile against engineering specifications.
Pressure and vacuum testing confirms the pipe maintains its structural integrity under the maximum suction that the turbocharger can generate at rated engine speed and full load conditions.
Cracks or splits in the DZ91149190014 pipe allow unfiltered air and debris into the engine. A whistling noise from the intake area under acceleration may indicate a developing air leak.
A collapsed or deformed pipe section restricts airflow to the turbocharger, reducing engine power and causing excessive black smoke from unburned fuel due to insufficient combustion air.
During air filter replacement, the intake pipe should be inspected for cracks, loose connections, and internal contamination. Damaged pipes must be replaced to protect the engine from dust ingestion.
The DZ91149190014 pipe is specifically formed for the Shacman X5000 air induction routing, with connection diameters and profile matching the central air filter and turbocharger inlet configuration.
Fleet workshops should maintain spare intake pipes for prompt replacement when cracks or impact damage are discovered during routine air filter service intervals.
Aftermarket intake pipes with incorrect profiles can restrict airflow or collapse under suction. We supply only the authentic Shacman X5000 X3000 Central Air Filter Intake Flat Pipe Sub Assembly DZ91149190014.
Each pipe is individually packaged with protective end caps. The part number DZ91149190014 is clearly printed on the packaging for immediate identification.
Our international logistics network ensures genuine DZ91149190014 intake flat pipes are available for dispatch to dealerships and fleet maintenance facilities worldwide.
Complete intake flat pipe sub assembly with protective end caps. Ready for installation with standard hose couplers and clamps.
Expert guidance on intake pipe installation and air induction system inspection. We help ensure your DZ91149190014 pipe delivers clean, unrestricted airflow.
For current stock availability on the genuine X3000 Central Air Filter Intake Flat Pipe Sub Assembly DZ91149190014, please use the contact buttons above.
