Harness Bracket
Кронштейн Жгута
Soporte de Arnés
OEM Harness Bracket 611600080107 precision‑formed for the Shacman X5000 heavy‑duty truck. This dedicated 611600080107 mounting component secures critical engine and chassis wiring harnesses, preventing movement that leads to insulation wear and electrical failure.
Manufactured from heavy‑gauge steel with a multi‑layer corrosion protection system, the Harness Bracket 611600080107 maintains its structural integrity through continuous vibration and exposure to under‑hood environmental conditions.
Replacing damaged or missing brackets with the genuine 611600080107 unit restores proper harness routing and protects the vehicle electrical system from preventable damage.
| Parameter | Specification |
|---|---|
| OEM Part Number | 611600080107 |
| Product Name | Harness Bracket |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Steel with Zinc‑Nickel Electroplating |
| Bracket Length | 128.00 mm |
| Bracket Width | 38.00 mm |
| Mounting Hole Diameter | 10.00 mm (single mounting point) |
| Harness Retention | Formed cradle with dual cable tie slots |
| Corrosion Protection | Zinc‑Nickel plating with 720‑hour salt spray rating |
| Application | Shacman X5000 engine compartment harness support |
The 611600080107 harness bracket is a critical but often overlooked component that maintains the correct position of electrical wiring throughout the Shacman X5000 engine compartment. It anchors harnesses at designated points along their routing path.
Loose or unsupported wiring harnesses are vulnerable to abrasion against metal edges, melting on hot exhaust surfaces, and fatigue failure at connector junctions. The Harness Bracket 611600080107 prevents these common failure modes.
In the densely packed X5000 engine bay, proper harness routing is essential for both reliability and serviceability. The bracket ensures that wiring bundles remain clear of rotating components and accessible for diagnostic access.
The 611600080107 bracket receives a zinc‑nickel electroplated coating that provides sacrificial corrosion protection significantly superior to conventional zinc plating. This coating withstands over 720 hours of neutral salt spray exposure.
The plating process creates a uniform, adherent layer that protects both external surfaces and the interior of mounting holes, ensuring that the bracket retains its structural cross‑section even in corrosive environments.
The 611600080107 bracket mounts to a threaded boss on the engine or chassis using a single high‑strength bolt. The bolt must be torqued to the specification in the Shacman service manual to prevent loosening from vibration.
Wiring harnesses are secured to the bracket using UV‑resistant cable ties passed through the formed slots. The ties should be snug but not over‑tightened, allowing for slight thermal expansion of the wiring insulation.
Each production lot of 611600080107 brackets undergoes accelerated corrosion testing according to ISO 9227 standards. Post‑test inspection verifies that no red rust appears on functional surfaces within the rated exposure period.
Mechanical load testing confirms that the bracket can support three times the weight of the specified harness bundle without permanent deformation. This safety margin accounts for dynamic loading during vehicle operation.
A cracked or missing 611600080107 bracket allows the harness to sag or swing freely. Visual inspection may reveal the harness resting against the engine block or draped over a hose where it is subject to abrasion damage.
Rust staining around the mounting hole or along formed edges indicates that the protective plating has been compromised. Such brackets should be replaced before structural weakening leads to fracture under vibration loading.
During routine engine service, all harness brackets should be visually inspected and physically checked for tightness. Replacing a suspect Harness Bracket 611600080107 prevents the progressive damage that loose wiring causes.
The 611600080107 bracket is designed for specific harness routing locations on the Shacman X5000 platform. Its formed shape matches the contour of the harness bundle it supports.
Fleet maintenance programs should include these brackets in their standard parts inventory. Keeping genuine 611600080107 brackets on hand supports rapid repairs and maintains electrical system integrity.
Aftermarket brackets fabricated from thinner gauge steel lack the durability of genuine components. We supply only the authentic Shacman X5000 Harness Bracket 611600080107 manufactured to OEM specifications.
Each bracket is individually packaged to prevent scratching during handling and transit. The part number 611600080107 is clearly displayed on the packaging for immediate identification in your parts inventory.
Our international supply chain maintains adequate stock levels to support dealerships, independent workshops, and fleet operators with prompt delivery of genuine 611600080107 brackets worldwide.
Single harness bracket with protective coating. Mounting bolt sold separately. Protective packaging prevents surface damage during shipping.
Expert guidance on harness routing and bracket placement. We help ensure your 611600080107 brackets provide reliable harness support.
For current stock availability and pricing on the genuine Harness Bracket 611600080107, please use the contact buttons above.
