Shacman X5000 Deflector system is a complete OEM air deflector assembly for the X5000 cab. This comprehensive kit includes the deflector sub-assembly, connecting rods, support frame, rubber pads, and all necessary fasteners: spring washers, hex nuts, large washers, flat washers, cross recessed pan head screws, and hexagon flange bolts. The Shacman X5000 Deflector reduces aerodynamic drag, improves fuel efficiency, and protects the cab roof from stone chips. Perfect for fleet upgrades or collision repair.
Engineered for a precise fit, this deflector assembly mounts directly to factory points using the included hardware.
Main aerodynamic deflector panel made from UV-stabilized ABS. Curved shape directs airflow over the trailer. Reduces drag by up to 8%. Includes integrated mounting bosses. Direct OEM replacement.
High-carbon steel spring washers (18 pcs Q40308 + 2 pcs Q40310). Provide vibration resistance and maintain bolt preload. Prevents loosening under road shock. Zinc-plated for corrosion resistance.
Standard hex nuts (18 pcs, M8). Galvanized finish. Used with spring washers and bolts to secure the deflector assembly. Conforms to DIN 934. Consistent torque retention.
Galvanized large washers: 18 pcs M8 (Q402B08) + 2 pcs M10 (Q402B10). Distribute clamping load over the deflector flange and rubber pads. Prevent pull-through and cracking.
Right side adjustable connecting rod. Links the deflector to the cab roof. Allows tilt adjustment. Made from galvanized steel, includes ball joints. Smooth movement.
Standard flat washers (8 pcs, M6). Used with cross recessed screws for securing rubber pads and trim. Hardened steel, zinc plated. Provides even bearing surface.
Pan head tapping screws (8 pcs, M6x25). Cross recess drive. Attach rubber pads to the deflector sub-assembly. Self-tapping into plastic bosses. Corrosion-resistant coating.
Elastomeric rubber pad (2 pcs) that cushions the deflector against the cab roof. Absorbs vibration and prevents paint damage. Molded to cab contour. Shore A 60.
Secondary rubber pad (2 pcs) for additional contact points. Thinner profile than Pad/I. Positions between the deflector and support frame. Reduces squeaking.
Left side adjustable connecting rod, mirror of right side. Enables tilt adjustment for optimal airflow. Ball joints allow articulation. Greaseable fittings.
Flange head bolts (2 pcs) with serrated underside. Secure the rear support frame to the cab. Eliminate need for separate washer. Torque to 20 Nm.
Four rubber pads for the support frame mounting points. Extra thickness to isolate vibrations. UV and ozone resistant. Easy to replace.
Welded steel frame that supports the rear edge of the deflector. Powder-coated black. Includes pre-drilled holes for rubber pads and connecting rods. Provides structural rigidity.
| Part Number | Part Name |
|---|---|
| DZ14251870150 | Deflector Sub-Assembly |
| Q40308 | Spring Washer |
| Q340B08T2F3 | Type 1 Hex Nut |
| Q402B08 | Large Washer (Galvanized) |
| DZ14251870354 | Right Front Connecting Rod |
| Q401B06 | Flat Washer |
| Q2140625 | Cross Recessed Pan Head Screw |
| DZ14251870222 | Rubber Pad/I |
| DZ14251870223 | Rubber Pad/II |
| DZ14251870353 | Front Left Connecting Rod |
| Q402B10 | Large Washer (Galvanized) |
| Q40310 | Spring Washer |
| DZ14251870164 | Hexagon Flange Bolt |
| DZ14251870224 | Rubber Pad/III |
| DZ14251870351 | Rear Support Frame Assembly |
Fuel savings – The Shacman X5000 Deflector reduces aerodynamic drag by up to 8%. Saves approximately 3-5% fuel on highway routes. Pays for itself quickly.
Noise reduction – Rubber pads and precise fit eliminate wind whistle. The Shacman X5000 Deflector creates a quieter cabin at highway speeds.
Rust-free hardware – All washers, nuts, and bolts are galvanized or zinc-plated. Pass 500h salt spray test. Perfect for winter road salt.
Complete kit – Includes every screw, washer, nut, rubber pad, rod, and frame. No extra shopping. The Shacman X5000 Deflector installs in under two hours.
Adjustable angle – Connecting rods allow 5 tilt positions. Optimize airflow for different trailer heights. Locking nuts secure setting.
Easy assembly – Pre-drilled holes align with cab roof mounts. Use included spring washers and hex nuts. Rubber pads position with adhesive backing.
Global availability – All 15 part numbers stocked regionally. Fast shipping for urgent fleet retrofits.
Durability validated – 100,000km road test, 2000h vibration test, 500h salt spray. No fastener loosening or component fatigue. OEM certified.
Dimensions – Deflector sub-assembly: 2100x450x80mm. Support frame: 1900x120x40mm. Connecting rods: adjustable 300-400mm. Weight: 12.5kg complete.
Eco-friendly – Deflector panel recyclable. Steel components 100% recyclable. Powder coating VOC-free.
Shacman X5000 Deflector is the only genuine air deflector kit for X5000 trucks. Order all part numbers listed above. The Shacman X5000 Deflector improves fuel economy, reduces wind noise, and protects your cab roof. Trust Shacman original parts for perfect fit and long service life.
Each Shacman X5000 Deflector kit includes the deflector sub-assembly, support frame, connecting rods, all rubber pads, and all fasteners. Available now through authorized Shacman dealers. Upgrade your fleet’s aerodynamics with genuine quality.
Compatibility: Fits all Shacman X5000 cabs (sleeper and day cab). Designed for standard trailer heights. Adjustable for high-cube trailers.
Ordering information: Minimum order quantity 1 kit. Bulk discounts for 10+ kits. Contact your local Shacman parts distributor for fleet pricing.
Service life: Deflector sub-assembly lasts 8-10 years. Rubber pads replace every 5 years. Hardware reusable. Replacement parts available individually.
Packaging: Deflector wrapped in foam, hardware in labeled poly bags, connecting rods in separate carton. Includes full-color installation guide.
Authenticity: Look for holographic Shacman genuine label. Counterfeit deflectors often lack rubber pads or use inferior plastic. Always buy from certified sources.
Customer support: Technical drawings and torque specifications available. Genuine Shacman X5000 Deflector comes with 24‑month warranty.
