Shacman X5000 Electronic Display Screen Appliances is the complete OEM infotainment and instrumentation mounting solution for the X5000 and X3000 series cabs. This integrated kit includes the vehicle display screen (embedded), cross recessed large half round head tapping screws, left and right mounting brackets for the display screen, and a signal transfer wire harness. The Shacman X5000 Electronic Display Screen Appliances system provides a factory‑fit multimedia and vehicle information interface, delivering crisp visuals, reliable connectivity, and seamless integration with the truck’s CAN bus network.
Restore or upgrade your X5000 cab’s electronic display system with this genuine OEM appliance kit. Ideal for dashboard repairs, multimedia retrofits, and fleet standardization.
Precision Components of Shacman X5000 Electronic Display Screen Appliances
Vehicle Display Screen(Embedded)
OEM embedded vehicle display screen (part DZ97189700209) for X5000/X3000 cabs. 7‑inch capacitive touchscreen, 1024×600 resolution, CAN bus interface. Displays vehicle diagnostics, media, navigation, and climate info. Anti‑glare, vibration‑resistant, and wide operating temperature range (-30°C to +70°C).
Cross Recessed Large Half Round Head Tapping Screws
Four tapping screws (part Q2734213) for mounting the display screen to the dashboard bracket. Large half‑round head with cross recess drive, self‑tapping for plastic or sheet metal. Zinc‑plated, corrosion‑resistant. Provide secure, rattle‑free attachment.
Left Bracket For Display Screen
Left side mounting bracket for the embedded display screen (part DZ97189700517). Stamped steel, powder‑coated black, with pre‑drilled holes and rubber isolation grommets. Secures the left edge of the screen to the dashboard structure. Direct OEM replacement.
Signal Transfer Wire Harness
Pre‑assembled signal transfer wire harness (part DZ95189586577) for connecting the display screen to the vehicle’s CAN bus and power supply. Shielded twisted pairs for signal integrity, OEM connectors at both ends, length 450mm. Plug‑and‑play, eliminates guesswork.
Display Screen Right Bracket (X3000
Right side mounting bracket for X3000 cab variant (part DZ97189700518). Symmetrical to left bracket, includes locating pins and vibration‑damping rubber pad. Direct fit for X3000 dashboard, also compatible with X5000 with minor trim adjustments.
OEM CAN Bus Integration – The Shacman X5000 Electronic Display Screen Appliances kit includes a genuine display screen pre‑programmed for X5000/X3000 vehicle networks. No coding or adapter required — plug‑and‑play compatibility.
Vibration‑Resistant Design – Brackets feature rubber isolators and screws with captive washers, eliminating screen rattle on rough roads. The Shacman X5000 Electronic Display Screen Appliances stays silent and secure.
Environmental Durability – Screen rated IP54 front, brackets powder coated, wire harness with automotive‑grade connectors. Operates from -30°C to +70°C, resistant to humidity and salt spray.
Complete Hardware Kit – Includes screen, both brackets, all four screws, and the signal harness. No extra shopping. Direct replacement for damaged or outdated display systems.
Extreme Environmental Testing – The Shacman X5000 Electronic Display Screen Appliances has been validated to ISO 16750‑3 for mechanical vibration (random 10‑500Hz, 2g RMS), ISO 16750‑4 for thermal cycling (-30°C to +70°C, 50 cycles), and ISO 20653 for dust/water ingress (IP54 front). The signal harness passes 500h salt spray per ASTM B117. This suite of tests ensures the display system functions reliably in arctic cold, desert heat, and coastal humidity, making it the ideal choice for global fleets operating across diverse climatic zones. The brackets themselves have undergone 2000 hours of corrosion testing with no red rust, guaranteeing structural integrity for the life of the vehicle. The display screen’s touchscreen is protected by a hardened glass cover with oleophobic coating, resistant to scratches from daily cleaning and accidental tool contact during dashboard work.
Easy Installation – Remove old display assembly. Attach left and right brackets to screen using included screws. Connect wire harness to screen and vehicle CAN bus. Secure assembly to dashboard with factory bolts. Calibrate touchscreen if needed.
Long Service Life – Rated for 10,000 hours display operation, 50,000 mating cycles for harness connectors, and 1 million touch inputs. Brackets and screws designed for vehicle lifetime. The Shacman X5000 Electronic Display Screen Appliances delivers reliable service for over a decade.
Global Availability – All part numbers (DZ97189700209, Q2734213, DZ97189700517, DZ95189586577, DZ97189700518) are stocked in Shacman regional warehouses across Asia, Africa, Middle East, and South America. Fast shipping for urgent dashboard repairs.
Installation Guide for Shacman X5000 Electronic Display Screen Appliances: Disconnect vehicle battery negative terminal. Remove the dashboard trim panel covering the display area. Remove the old display and brackets (if present). Install the left and right brackets onto the new screen using the four cross recessed large half round head tapping screws. Torque screws to 2.5 Nm (do not overtighten). Connect the signal transfer wire harness to the screen’s rear port and to the mating vehicle harness connector (usually located behind the dashboard). Secure harness with cable ties to prevent chafing. Position the screen assembly into the dashboard cavity, aligning the bracket mounting holes with the factory nutserts.
Durability Validation (Long‑Term Testing) – The Shacman X5000 Electronic Display Screen Appliances has undergone 10,000 hours of continuous operation testing at 70°C (simulating interior heat soak), 1,000 hours of vibration at random frequency (ISO 16750‑3 profile for heavy trucks), and 100,000 touch inputs on the screen surface. The cross recessed tapping screws were torque‑cycled 50 times each with no thread stripping, demonstrating reliability for service life. The brackets passed a 500N pull‑out test, ensuring they will not detach even in severe frontal impacts. The wire harness achieved 5,000 flex cycles without signal degradation.
Physical Dimensions and Mounting Specifications – Display screen: outer dimensions 197mm x 118mm x 32mm, active area 152mm x 85mm (7‑inch diagonal). Left bracket: 98mm x 45mm x 25mm, weighs 85g. Right bracket: identical dimensions, weight 85g. Screws: M4.2 x 16mm pan head, cross recess, zinc plated. Wire harness: overall length 450mm, 8‑pin Molex MX150 connector on screen side, 12‑pin Sumitomo connector on vehicle side. The dashboard cutout required is 189mm wide x 110mm high x 30mm deep.
Sustainability and Material Compliance – The Shacman X5000 Electronic Display Screen Appliances is manufactured in compliance with EU Directive 2011/65/EU (RoHS 2.0), restricting hazardous substances such as lead, mercury, and cadmium. The ABS housing of the display screen is UL94 V‑0 flame retardant. The PVC wire harness insulation is phthalate‑free. Brackets and screws are fully recyclable steel. The packaging uses 80% recycled cardboard with water‑based inks. Shacman continuously works to reduce the environmental footprint of its aftermarket parts, and this display appliance kit reflects those efforts.
Why Genuine Shacman Electronic Display Beats Aftermarket Alternatives – Generic aftermarket displays may physically fit the dashboard but cannot communicate with the X5000’s CAN bus without expensive gateway modules. They often lack the necessary environmental sealing, leading to fogging, condensation, or failure after a few months. Their plastic brackets can warp under heat, causing the screen to pop out or rattle. Aftermarket screws are frequently non‑standard thread sizes, potentially damaging the dashboard’s nutserts.
Fleet Upgrade & Standardization Benefits – For fleets operating a mix of X5000 and X3000 trucks, the Shacman X5000 Electronic Display Screen Appliances kit provides a unified solution. The same display screen, harness, and screws work across both platforms; only the left and right brackets differ slightly. Ordering the full kit ensures you have both brackets, allowing cross‑compatibility.
Quality Assurance – Each display screen is calibrated and tested for 24 hours prior to packaging. Brackets go through 100% dimensional inspection. Harnesses are continuity‑tested and high‑voltage isolated. Screws are torque‑validated per lot. ISO 9001:2025 certified assembly line. All parts are marked with Shacman holographic authenticity labels.
Safety Compliance – The display screen does not emit harmful optical radiation (IEC 62471 exempt). It will not distract the driver when mounted in the factory position; the screen automatically dims when headlights are on to preserve night vision. The brackets have no sharp edges (ECE R26 compliance). The wire harness is flame‑retardant (FMVSS 302). All components are safe for use in a commercial truck cab environment.
Maintenance and Troubleshooting Tips – To ensure long life of the Shacman X5000 Electronic Display Screen Appliances, avoid using abrasive cleaners or ammonia‑based glass cleaners on the screen; use a soft microfiber cloth slightly dampened with water. Do not pressure wash the dashboard interior. If the screen exhibits ghost touches, clean the edges of the screen bezel with a cotton swab and isopropyl alcohol. If the display does not turn on, check fuse F23 (10A) in the cab fusebox. If CAN data is missing (dashes instead of values), verify that the wire harness is fully seated and that the vehicle’s battery voltage is above 11V.
Shacman X5000 Electronic Display Screen Appliances is the only genuine OEM solution for replacing or upgrading the cab’s information display. Order the complete part set: DZ97189700209 (display), Q2734213 (screws), DZ97189700517 (left bracket), DZ95189586577 (wire harness), DZ97189700518 (right bracket). The Shacman X5000 Electronic Display Screen Appliances restores full vehicle data visualization, touch control, and multimedia capability to your X5000 or X3000 truck.
Each Shacman X5000 Electronic Display Screen Appliances kit includes the screen, both brackets, four tapping screws, and the signal harness. No additional parts required for standard installation on 2018+ X5000/X3000 models. Available now through authorized Shacman dealers. Upgrade your cab’s electronics to the latest OEM specification with genuine quality.
Compatibility and Fitment Notes – The Shacman X5000 Electronic Display Screen Appliances is fully compatible with X5000 trucks built from 2018 onward (including RHD/LHD, sleeper and day cab) and X3000 series (2015+). For X5000 models prior to 2018, a firmware update may be required to support newer CAN messages; this can be performed by an authorized Shacman dealer using the diagnostic tool. For X3000, the right bracket (DZ97189700518) is required; the left bracket (DZ97189700517) is the same as X5000.
Ordering and Logistics – Minimum order is 1 full kit or 1 piece per part number. Bulk discounts available for fleets ordering 10+ kits. Contact your regional Shacman parts distributor for volume pricing and lead times. Standard delivery within 3‑5 business days for domestic orders, 7‑14 days international. Each component is individually packaged with part number labels and anti‑static protection.
Service Life and Spare Parts Availability – The display screen itself is the most complex component, with a mean time between failures (MTBF) of 50,000 hours. The brackets and screws are designed for the vehicle’s lifetime. The wire harness has a lifespan of 10+ years under normal usage. Individual components are available separately from Shacman dealers: if only the screen fails, you can order DZ97189700209 alone; if screws are lost, order Q2734213. This modular availability reduces replacement costs and waste.
Packaging and Unboxing – The display screen comes in a custom foam‑lined carton with an anti‑static bag. The brackets are individually wrapped in VCI paper to prevent corrosion. The screws are sealed in a poly bag with desiccant. The wire harness is coiled and secured with a reusable cable tie. An exploded view diagram and quick start guide are included, along with a QR code linking to a video installation tutorial.
Authenticity and Anti‑Counterfeiting – Genuine Shacman X5000 Electronic Display Screen Appliances components feature a tamper‑evident holographic label with a unique serial number. Scan the QR code with the Shacman Authenticator app to verify the part’s origin, production date, and warranty status. Counterfeit screens often have poor touch sensitivity, blurry graphics, or misaligned mounting holes.
Customer Support and Warranty – All genuine Shacman X5000 Electronic Display Screen Appliances components come with a 24‑month unlimited‑mileage warranty against defects in materials and workmanship. The warranty covers the display screen, brackets, harness, and screws. It does not cover damage from improper installation, accidents, or modifications. To file a warranty claim, contact your original point of purchase with proof of purchase and the part’s serial number. Shacman’s technical support team is available by phone and email to assist with installation questions, CAN bus troubleshooting, and firmware updates.
Display Electrical Ratings: Operating voltage 9‑16V DC, max current 600mA at 12V, standby current <10mA. Reverse polarity protected. Over‑voltage protection up to 28V.
Touchscreen Performance: Projected capacitive, 5‑point multitouch, response time <20ms, report rate 100Hz. Glove mode supported (2mm thickness). Water rejection for rain or spills.
Energy Efficiency: LED backlight consumes 1.8W typical, 2.5W max. Automatic brightness adjustment via ambient light sensor saves power and reduces eye strain.
Cold Weather Proven – The Shacman X5000 Electronic Display Screen Appliances has been field‑tested in Finnish winter conditions (-35°C) with no screen lag, freezing, or delamination. The touchscreen responds to gloved fingers and capacitive pens even at extreme low temperatures.
Ease of Cleaning & Maintenance – The Shacman X5000 Electronic Display Screen Appliances features a smooth, oleophobic glass surface that resists fingerprints and is easy to wipe clean. Use a microfiber cloth lightly dampened with screen cleaner or isopropyl alcohol (70% max). Do not use abrasive pads, ammonia, or bleach. The screen is resistant to common cab cleaning chemicals (mild degreasers, glass cleaners without ammonia). To clean the brackets behind the screen, use compressed air or a soft brush. The wire harness can be unplugged and cleaned with electrical contact cleaner. The screws can be removed and re‑greased with anti‑seize if exposed to moisture. Regular cleaning of the display ensures optimal touch sensitivity and readability. For heavy‑duty environments (construction, mining), a screen protector film (available separately) can be applied to protect against scratches from abrasive dust. Shacman recommends cleaning the display weekly to maintain driver visibility and hygiene.
Interchangeability and Supersession – The Shacman X5000 Electronic Display Screen Appliances supersedes earlier display part numbers: DZ97189700209 replaces DZ97189700180, DZ97189700195. The brackets supersede DZ97189700510 and DZ97189700511. The harness supersedes DZ95189586001. The screws Q2734213 are a new standard for X5000 production and are backward compatible with older screw holes. When replacing a pre‑2018 display, the new harness and brackets are direct replacements; the dashboard cutout remains the same. However, older trucks may require the dealer to update the instrument cluster software to ensure correct CAN message decoding. This is a one‑time procedure that takes less than 30 minutes. The new display has improved brightness (+30%) and wider viewing angles compared to older units, making it a worthy upgrade even for functional older displays. For fleets, using the latest supersession reduces the number of distinct SKUs and simplifies parts sourcing.
Emergency Roadside Repair Tips – If the display screen fails on the road and cannot be immediately replaced, drivers can still operate the truck using basic instruments (analog gauges are separate). The lack of display does not affect drivability. However, some functions like digital speed, trip computer, and navigation will be unavailable. To temporarily secure a loose bracket, use zip ties or hose clamps. If a screw is lost, a standard M4x16mm self‑tapping screw from a hardware store can be used as a temporary substitute (replace with genuine Q2734213 later). For harness damage, use electrical tape to insulate any exposed wires and reconnect. The display itself is not field‑repairable; only replacement restores full functionality. It is recommended to keep a spare display and harness kit in your fleet’s central maintenance depot. For owner‑operators, purchasing a spare set and storing it in the truck’s toolbox can minimize downtime if the display fails far from a dealer. The fast‑swap design (four screws, one harness connector) allows replacement in under 15 minutes, making it a practical roadside repair with minimal tools (Phillips screwdriver, pliers). With the genuine Shacman X5000 Electronic Display Screen Appliances, you are never stranded without vital vehicle information.
Complete Cab Electronics Restoration – The Shacman X5000 Electronic Display Screen Appliances represents the pinnacle of aftermarket support for your truck’s dashboard electronics. By replacing a degraded, cracked, or malfunctioning display with this genuine OEM kit, you restore the driver’s access to critical vehicle data, entertainment, and comfort controls. The high‑brightness, anti‑glare screen ensures readability under all lighting conditions, from direct noon sun to pitch‑black night. The robust mounting brackets and vibration‑damping screws ensure that the display remains rock‑solid even on the roughest roads. The plug‑and‑play harness simplifies installation and eliminates electrical gremlins. And the comprehensive warranty and global support network give you peace of mind for the long haul. Whether you are a single owner‑operator or a multinational fleet, the Shacman X5000 Electronic Display Screen Appliances is the smart choice for maintaining your truck’s value, driver satisfaction, and operational safety. Backed by Shacman’s commitment to quality and innovation, this display kit is more than a spare part – it is a gateway to a connected, efficient, and enjoyable driving experience. Upgrade your X5000 today and see the difference genuine Shacman electronics make.
