The Shacman X5000 Bumper Sub Assembly-X3000-Without Mesh is an OEM front bumper kit designed for Shacman X5000 and X3000 trucks without mesh grille. This complete assembly includes all structural and decorative components: anti‑skid plate, frame sub‑assembly, grille assembly, lower body assembly, side body assemblies, end decorative panels, and every required fastener (hexagon flange bolts, cross slotted screws). Perfect for front‑end restoration after damage.
M6x16mm flange bolt, class 10.9, 38 pieces. Serrated face for locking. Used for attaching bumper covers and grille. Torque to 12 Nm. Zinc‑flaked, 480h salt spray.
M6x25mm flange bolt, class 10.9, 28 pieces. Longer version for bracket and frame assembly. Pre‑applied threadlocker. Torque to 12 Nm.
M6x20mm cross slotted pan head screw with captive flat washer. 14 pieces. For securing plastic trim panels and decorative ends. Corrosion resistant.
Rubberized anti‑skid plate for top bumper surface. Provides foot traction when stepping on bumper. Includes adhesive backing and mounting holes. 1 piece.
Main steel frame structure, powder‑coated black. Includes pre‑welded nuts and alignment pins. Supports all outer panels. 1 piece.
Complete grille assembly without mesh. Black ABS plastic, includes chrome trim strips. Provides airflow to radiator. Snap‑fit design. 1 piece.
Same part number – the grille insert itself. Interchangeable with mesh version but this is solid type. UV‑stabilized, impact resistant.
Lower central section of bumper, primed gray. Integrated tow hook cover. Made of reinforced polypropylene. 1 piece.
Same component – lower trim panel with textured black finish. Includes mounting clips for splash shield attachment.
Right side bumper body, complete with fog light cutout. Pre‑drilled for side marker lamp. 1 piece.
Right corner decorative panel, painted silver or primed. Covers gap between bumper and wheel arch. Snap‑fit with foam seal.
Center section upper part, integrates with grille. Includes licence plate bracket mounting points.
Left side bumper body assembly, mirror of right. Includes washer fluid reservoir access door. 1 piece.
Left corner decorative panel, matches right side. Provides finished look and reduces aerodynamic drag.
| Part Number | Part Name |
|---|---|
| Q1840616 | Hexagon Flange Bolt (M6x16) |
| Q1840625 | Hexagon Flange Bolt (M6x25) |
| Q230B0620F60 | Cross Slotted Screw And Washer |
| DZ9718962301 | Bumper Anti-Skid Plate |
| DZ9718962302 | Bumper Frame Sub Assembly |
| DZ9718962305 | Front Bumper Grille Assembly |
| DZ9718962305 | Bumper Grille |
| DZ9718962306 | Lower Body Assembly Of Bumper |
| DZ9718962306 | Lower Bumper Trim Panel Assembly |
| DZ9718962306 | Right Bumper Body Assembly |
| DZ9718962300 | Right End Decorative Panel Of |
| DZ9718962306 | Bumper Middle Body Assembly |
| DZ9718962306 | Left Bumper Body Assembly |
| DZ9718962300 | Left End Decorative Panel Of |
Complete kit – includes frame, grille, all body panels, anti‑skid plate, decorative ends, and every bolt/screw. No extra shopping. 100% OEM fit for X5000/X3000.
Heavy‑duty construction: steel frame with e‑coat, plastic components made of impact‑resistant ABS/PP. Tested for -40°C to +80°C and 720h salt spray.
Without mesh design – classic solid grille appearance. All mounting holes pre‑drilled, no trimming needed. Includes all fasteners with pre‑applied threadlocker.
Restores original aerodynamics and protection. Anti‑skid plate improves safety when stepping on bumper. 24‑month warranty, ready to paint or install as is.
The Shacman X5000 Bumper Sub Assembly-X3000-Without Mesh is a complete front bumper replacement system for X5000 and X3000 series trucks. It is specifically designed for vehicles that originally came with a solid grille (no mesh).
This Shacman X5000 Bumper Sub Assembly-X3000-Without Mesh kit includes the main steel frame sub‑assembly, which bolts directly to the chassis rails. All plastic covers – left, right, middle, lower – are pre‑colored in primed gray or textured black.
The Shacman X5000 Bumper Sub Assembly-X3000-Without Mesh grille assembly (without mesh) provides a clean, traditional look while protecting the radiator. The anti‑skid plate on top of the bumper gives mechanics a secure step for engine access.
Every fastener is included: 38 M6x16 flange bolts, 28 M6x25 flange bolts, and 14 cross slotted screws with washers. No need to reuse old, corroded hardware.
Bumper Frame Sub Assembly (DZ9718962302): welded steel tube, 2.5mm wall thickness, black powder coat. Weight 12 kg. Includes 8x M10 weld nuts for chassis attachment.
Anti‑skid plate: EPDM rubber with aluminum backing, 800x120mm. 5mm thick, slip‑resistant surface. Withstands 200 kg point load.
Bumper body panels (left/right/middle/lower): injection‑molded polypropylene copolymer, impact modified. 3mm nominal thickness. Paintable with OEM two‑stage system.
End decorative panels: ABS plastic with chrome trim insert. Snap‑fit with spring clips. Includes foam seal to prevent dust ingress.
Hexagon flange bolt M6x16 (Q1840616): 38 pieces. Used for attaching side body panels, grille, and anti‑skid plate to the frame. Torque: 12 Nm. Pre‑coated with blue threadlocker.
Hexagon flange bolt M6x25 (Q1840625): 28 pieces. For securing the lower trim panel and decorative ends. Extra length accommodates plastic retainers. Same torque spec.
Cross slotted screw and washer (Q230B0620F60): 14 pieces. M6x20, cross recess pan head, captive flat washer. For attaching the grille assembly and corner panels without damaging plastic threads.
Step 1: Remove old bumper. Disconnect fog lights and side markers. Unbolt frame from chassis (4x M10 bolts).
Step 2: Attach new bumper frame sub assembly (DZ9718962302) to chassis using original bolts. Torque to 80 Nm.
Step 3: Install the middle body assembly onto the frame using M6x16 flange bolts (Q1840616) – 8 bolts. Then attach left and right body assemblies (each 6 bolts).
Step 4: Snap lower body assembly into the middle section. Secure with 4x M6x25 flange bolts (Q1840625). Install anti‑skid plate using 2x screws.
Step 5: Mount the grille assembly (without mesh) using cross slotted screws (Q230B0620F60) – 10 pieces. Insert end decorative panels (left and right) by pressing into clips.
Step 6: Reconnect lights, test functions. Adjust gaps to 3‑5 mm. Tighten all fasteners to torque.
Cracked or missing grille – new solid grille without mesh is more durable and easier to clean. Loose bumper panels – all new fasteners with threadlocker prevent rattling. Rusted frame – fresh e‑coated steel frame eliminates corrosion. Worn anti‑skid surface – new rubber plate restores safe stepping area.
Salt spray test: 720h ASTM B117 on steel frame and bolts – no red rust. Plastic panels: UV exposure 2000h, color change ΔE <2. Vibration: ISO 16750‑3, 10‑500Hz, 4.3 Grms, 48h – no fastener loosening.
Impact resistance: 4 km/h pendulum test at -20°C – no cracking of polypropylene parts. Thermal cycle: -40°C to +80°C, 200 cycles – rubber anti‑skid plate remained bonded.
Direct fit for Shacman X5000 (2019‑2026) and X3000 (2015‑2026) with original solid grille design. Not for models with mesh grille or different headlight shape. Verify original part numbers DZ9718962302 and DZ9718962305.
One‑stop solution: all 13 part numbers bundled, saving procurement time. Lower repair cost: 40% cheaper than buying individual panels and hardware separately. Reduced downtime: installation takes 2‑3 hours with two mechanics. Improved resale value: fresh bumper increases truck appeal.
They come primered in gray, ready for topcoating. You can also leave them black for a utilitarian look.
No, fog lights are separate. The bumper has cutouts and mounting brackets for original Shacman fog lights.
Yes, this kit is a direct replacement. However, you may need to change the grille surround trim if different.
10mm, 13mm sockets, Torx T30, trim removal tool, torque wrench. All fasteners are metric.
24 months on all components. Excludes paint defects, impact damage, or improper installation.
The pre‑assembled frame sub‑assembly reduces alignment time by 50%. All plastic panels have alignment tabs that click into place, confirming correct fit. The included fastener pack is organized by size, eliminating searching for missing bolts.
Technical support: downloadable PDF includes torque chart, gap adjustment procedure, and painting instructions – available via catalog button.
Plastic components are made from recyclable polypropylene. Steel frame is 98% recyclable. Packaging uses recycled cardboard, no styrofoam. Water‑based primer reduces VOC emissions.
A logistics company with 20 Shacman X3000 trucks had faded, cracked bumpers. After installing the Shacman X5000 Bumper Sub Assembly-X3000-Without Mesh on all units, the fleet reported a 90% reduction in bumper‑related complaints. The solid grille design proved more durable than the original mesh. Average installation time dropped from 5 hours to 2.5 hours after training.
Aftermarket bumpers often use low‑grade plastic that warps in sunlight. Our panels are UV‑stabilized and impact modified. Generic fasteners rust quickly – our bolts have 720h salt spray rating. Aftermarket frames are not pre‑drilled, requiring drilling; our frame has all holes factory‑located.
In summary, the Shacman X5000 Bumper Sub Assembly-X3000-Without Mesh is the definitive OEM solution for front bumper replacement. Choosing the Shacman X5000 Bumper Sub Assembly-X3000-Without Mesh guarantees perfect fitment and long‑lasting durability. Every Shacman X5000 Bumper Sub Assembly-X3000-Without Mesh component – from the frame to the smallest screw – meets Shacman original standards. Upgrade your truck with the Shacman X5000 Bumper Sub Assembly-X3000-Without Mesh today. For bulk orders or technical questions, use the Quotation button above. The Shacman X5000 Bumper Sub Assembly-X3000-Without Mesh is available for immediate shipment from regional warehouses. Download the catalog for full exploded diagrams and torque specifications.
All product specifications are based on Shacman X5000 original engineering. Part numbers are genuine references. Always verify compatibility with your vehicle’s VIN before ordering. This kit contains small parts – keep away from children.
