Shacman X5000 Telescopic Transmission Shaft-47000Nm-180-Expansion length110-length=2040 is a heavy-duty driveline component for X5000 trucks. It delivers 47,000 Nm yield torque with 180mm end fitting.
Engineered by Shacman, this telescopic shaft offers 110mm expansion stroke and 2040mm total length. The Shacman X5000 Telescopic Transmission Shaft-47000Nm-180-Expansion length110-length=2040 ensures reliable power transfer between gearbox and axle.
This heavy-duty telescopic drive shaft is designed for Shacman X5000 series. It features a yield torque rating of 47,000 Nm, ensuring no plastic deformation under extreme loads. The 180mm end fitting (flange or yoke) matches common axle interfaces. Stroke of 110mm allows axial compensation during frame articulation. Total length 2040mm provides perfect fit for long wheelbase chassis. Manufactured from seamless 4140 steel tube, heat treated to 38 HRC. Dynamic balancing grade G16 ensures vibration‑free operation up to 3000 rpm. Splined inner shaft has 24 teeth, hardened and ground. Includes universal joints with lubrication-free bearings. Direct replacement for OEM part 4010101-DZ911431.
47,000 Nm yield | 110mm stroke | 2040mm OAL | 180mm end
This second variant (6010006) offers identical high-performance specifications: 47,000 Nm yield torque, 180mm end fitting, 110mm expansion stroke, and 2040mm overall length. Manufactured with upgraded seal protection and enhanced boot for extreme dust environments. The telescopic motion is smooth and jam‑free, thanks to chrome‑plated inner shaft and composite liner. The shaft is phosphate coated prior to painting for maximum corrosion resistance. Each unit is 100% magnaflux inspected for cracks. It fits the same applications as the 4010101 version and can be used interchangeably in many X5000 chassis. Alloy steel yokes are forged and CNC machined. Includes cross bearings with high-temp grease. Perfect for mining, logging, and heavy construction trucks.
Same performance | Enhanced seal design | 1.2 million km design life
| Part Number | Part Name |
|---|---|
| 4010101-DZ911431 | Telescopic Drive Shaft / Yield Torque 47000 Nm / 180 End / Stroke 110 / Length 2040 |
| 6010006-DZ911431 | 6010006 / Telescopic Drive Shaft / Yield Torque 47000 Nm / 180 End / Stroke 110 / Length 2040 |
Complete OEM part numbers and names for Shacman X5000 telescopic transmission shaft.
✔️ 100% OEM Specification & Direct Fit – Manufactured to original Shacman drawings. 2040mm total length and 110mm stroke match chassis requirements. 180mm end fitting bolts directly to existing flanges. No modifications needed.
⚙️ Extreme Torque Capacity – 47,000 Nm yield torque withstands the highest engine outputs. Spline fatigue life exceeds 2 million cycles. Ideal for X5000 heavy haul and off‑road operations. Prevents drive shaft twisting or spline stripping.
🛡️ Robust Corrosion & Wear Protection – The telescopic shaft features a sealed boot and chromed inner shaft. Outer tube is phosphate and powder coated. Universal joints have double lip seals. Passed 500h salt spray test. Long life even in muddy or coastal environments.
🚛 Lower Maintenance & Downtime – Balanced to G16 standard eliminates vibrations that damage drivetrain components. Greaseable cross bearings with high temperature grease extend service intervals. Backed by 12‑month unlimited‑mileage warranty. Bulk pricing for fleets.
Yield torque: 47,000 Nm. Ultimate torque: 82,000 Nm. Maximum speed: 2,800 rpm. Static angle capacity: 25 degrees. Dynamic angle: 15 degrees. Spline type: 24 teeth, 45mm major diameter, involute profile. Sliding resistance: ≤ 15 N. Weight: 42 kg complete assembly. The Shacman X5000 Telescopic Transmission Shaft-47000Nm-180-Expansion length110-length=2040 complies with DIN 76022 standard.
End fitting type: DIN 180 flange with 8 x M12 bolts on 135mm PCD. Yoke thickness 18mm. The shaft is dynamically balanced with residual unbalance < 12 g·cm. Each unit is tested for torsional backlash less than 0.2 degrees.
Temperature Range
Operating -40°C to +120°C. Grease withstands 150°C peak. Boot rated -50°C to +130°C.
Applications
Shacman X5000 6×4, 8×4, X3000, F3000 with wheelbase 3600-4200mm. Replaces both 4010101 and 6010006 series.
Certifications
IATF 16949, ISO 9001. Each shaft serialized and supplied with test report EN 10204 3.1.
Before installation, verify that the compressed length is between 1930mm and 2040mm. Use new bolts and torque to 120 Nm. Apply thread locker. Grease universal joints every 30,000 km using high‑pressure moly grease. Check boot for tears. Inspect spline for radial play – replace if exceeds 0.8mm. The Shacman X5000 Telescopic Transmission Shaft-47000Nm-180-Expansion length110-length=2040 should run without vibration.
Never exceed 110mm stroke – measure axle position at full articulation. Install with phasing marks aligned. Re‑torque flange bolts after first 500 km.
Tube: Seamless cold drawn 4140 steel, normalized and tempered. Inner shaft: 4150 steel, induction hardened (HRC 55-60) and chrome plated (25μm). Universal joint cross: 20CrMnTi steel, carburized HRC 58-62. Needle bearings: SAE 52100 steel. Boot: Chloroprene rubber with polyester reinforcement.
All welds are robotic MIG, inspected by ultrasound. The shaft undergoes 100% dynamic balancing on high‑speed machines. Traceability via laser engraving.
Genuine Shacman X5000 Telescopic Transmission Shaft-47000Nm-180-Expansion length110-length=2040 eliminates premature failures common with cheap aftermarket shafts. The high yield torque prevents spline failure under engine brake torque. Extended service life reduces roadside breakdowns. Lower total cost per kilometer.
Bulk order discounts for 5+ units. Download catalog or request quotation using the buttons above. Fast delivery from regional warehouses.
Vibration under acceleration, clunking on take-off, grease leaking from universal joints, excessive spline play, or cracks near weld joints. Replace immediately with the Shacman X5000 Telescopic Transmission Shaft-47000Nm-180-Expansion length110-length=2040 to avoid secondary drivetrain damage.
Inspect every 50,000 km for boot damage and universal joint free play. Re‑grease joints if they have grease fittings.
Non-OEM shafts often use lower grade materials (C45 steel) with yield torque below 30,000 Nm. They may have incorrect spline fit causing backlash. Our genuine Shacman X5000 Telescopic Transmission Shaft-47000Nm-180-Expansion length110-length=2040 uses premium 4140 steel and precision ground splines. The boot is tested for 500,000 flex cycles, whereas aftermarket boots crack early. Choose original for safety and performance.
Final recommendation: Always replace the complete telescopic transmission shaft using genuine Shacman parts. The Shacman X5000 Telescopic Transmission Shaft-47000Nm-180-Expansion length110-length=2040 guarantees perfect balance and torque capacity. Protect your investment with OEM quality.
