Ball Pin
Шаровой Палец
Perno Esférico
OEM Ball Pin 81.48225.0029 precision‑ground for the Shacman X5000 clutch and brake linkage systems. This hardened 81.48225.0029 articulating joint provides smooth, low‑friction rotational movement between connected components.
Manufactured from case‑hardened alloy steel with a ground spherical surface, the Ball Pin 81.48225.0029 withstands the concentrated contact stresses of pivot joints while maintaining precise dimensional accuracy.
Replacing a worn or corroded ball pin with the genuine 81.48225.0029 component restores proper joint function and eliminates the free play that causes imprecise pedal feel and accelerated wear.
| Parameter | Specification |
|---|---|
| OEM Part Number | 81.48225.0029 |
| Product Name | Ball Pin |
| Brand / Model | Shacman X5000 |
| Material | Case‑Hardened Alloy Steel with Phosphate Coating |
| Ball Diameter | Approximately 15.00 mm spherical end |
| Shank Diameter | Approximately 10.00 mm |
| Overall Length | Approximately 35.00 mm |
| Surface Hardness | HRC 58‑62 on spherical surface |
| Retention Feature | Retaining clip groove on shank |
| Application | Shacman X5000 pedal linkage articulating joints |
The 81.48225.0029 ball pin provides a spherical bearing surface that allows angular movement between connected linkage components while maintaining precise positional control.
In the Shacman X5000 pedal mechanisms, ball pins are used at clevis connections where the push rod must articulate through an arc as the pedal travels, accommodating angular change without binding.
The hardened spherical surface of the Ball Pin 81.48225.0029 resists the wear that flat pins experience under angular loading, maintaining smooth operation and consistent pedal feel throughout its service life.
The 81.48225.0029 ball pin is manufactured from alloy steel and undergoes case hardening to create a hard, wear‑resistant spherical surface while maintaining a tough, ductile core.
The ground spherical surface provides a smooth bearing interface with the mating socket, while the phosphate coating provides corrosion protection and helps retain lubrication at the joint.
The 81.48225.0029 ball pin installs through the clevis arms with the spherical end engaging in the mating socket. A retaining clip in the shank groove secures the pin against axial movement.
The joint should be lubricated with appropriate grease during assembly. The retaining clip must be inspected for proper seating to ensure the pin remains securely positioned during operation.
Each production batch of 81.48225.0029 ball pins undergoes dimensional inspection including spherical diameter, shank diameter, and surface finish measurement against engineering specifications.
Hardness testing verifies both surface hardness and effective case depth, ensuring the pin meets wear resistance requirements for its articulating joint application.
Excessive free play or a clicking sensation in the pedal linkage indicates that the 81.48225.0029 ball pin or its mating socket has worn beyond acceptable limits.
Scoring, pitting, or a flattened area on the spherical surface indicates inadequate lubrication or excessive loading. Damaged pins must be replaced to restore proper joint function.
During pedal mechanism service, all ball pins should be inspected for surface condition and secure retention. Replacing worn pins prevents progressive linkage wear and maintains control precision.
The 81.48225.0029 ball pin is specifically dimensioned for designated articulating joints in the Shacman X5000 pedal linkage, matching factory specifications for diameter and fit.
Fleet workshops should maintain spare ball pins and retaining clips for replacement during linkage service, ensuring continued smooth and precise pedal operation.
Aftermarket ball pins with incorrect dimensions or hardness can cause rapid joint wear. We supply only the authentic Shacman X5000 Ball Pin 81.48225.0029 built to OEM specifications.
Each ball pin is individually packaged with protective coating. The part number 81.48225.0029 is clearly printed on the packaging for immediate identification.
Our international logistics network ensures genuine 81.48225.0029 ball pins are available for dispatch to dealerships and fleet facilities worldwide.
Single ball pin with phosphate coating and retaining clip groove. Ready for installation into pedal linkage articulating joints.
Expert guidance on ball pin installation and linkage lubrication. We help ensure your 81.48225.0029 pins provide smooth articulating movement.
For current stock availability on the genuine Ball Pin 81.48225.0029, please use the contact buttons above.
