Concave Plate
Вогнутая Пластина
Placa Cóncava
This OEM concave plate (part 81.61851.0008) is a precision-formed structural steel component engineered specifically for the Shacman X5000 heavy-duty commercial truck chassis and suspension mounting systems. The 81.61851.0008 plate provides critical locating, spacing, and load distribution functions at designated chassis interface points.
Manufactured from high-quality structural steel with precision stamping and formed concave contour, this 81.61851.0008 plate withstands extreme compressive loads, dynamic forces, and continuous vibration during demanding heavy-duty commercial vehicle operations across all road and terrain conditions.
Replacing a damaged, deformed, or corroded concave plate with this genuine 81.61851.0008 component restores proper component positioning and load distribution. The OEM number guarantees exact dimensional specifications and factory-engineered material properties for the Shacman X5000 platform.
| Parameter | Specification |
|---|---|
| OEM Part Number | 81.61851.0008 |
| Product Name | Concave Plate |
| Brand / Model | Shacman X5000 |
| Position | Chassis and Suspension Mounting Interface Points |
| Material | High-Quality Structural Steel |
| Profile | Precision-Formed Concave Contour |
| Manufacturing Process | Precision Stamping, CNC Forming, Edge Treatment |
| Function | Precision Locating, Load Distribution, and Component Spacing |
The 81.61851.0008 concave plate serves as a critical precision locating and load distribution element that positions connected components accurately while distributing clamping forces across its formed surface on the Shacman X5000.
This 81.61851.0008 plate provides a precisely contoured interface that matches mating component geometry, ensuring proper alignment and preventing misalignment that could lead to uneven wear or component stress during vehicle operation.
The concave formed profile of the 81.61851.0008 creates a self-centering locating feature that guides components into correct position during assembly, simplifying installation procedures and ensuring consistent assembly quality across production and service operations.
This 81.61851.0008 component also serves as a spacer element that maintains correct clearance relationships between assembled parts, preventing interference and ensuring proper functional clearances throughout the vehicle’s operational lifetime.
The plate’s formed structural steel construction provides excellent resistance to compression and deformation under high clamping forces, maintaining its precise contour and dimensional accuracy even under maximum fastener torque conditions.
The 81.61851.0008 plate is engineered to meet the specific dimensional and load requirements of its designated location on the Shacman X5000, ensuring compatibility with all related mounting hardware and connected chassis system components.
By providing precise component positioning and reliable load distribution, this concave plate contributes to consistent assembly quality, reduced component wear, and simplified maintenance procedures during routine vehicle service operations.
The 81.61851.0008 concave plate is manufactured from high-quality structural steel with carefully controlled material specifications, providing exceptional compressive strength and resistance to deformation under maximum rated clamping loads.
The anti-corrosion treatment of the 81.61851.0008 plate provides excellent protection against rust, moisture, and environmental contaminants, ensuring long-term structural integrity in demanding under-chassis operating environments worldwide.
The precision stamping and CNC forming process of the 81.61851.0008 ensures consistent concave contour accuracy and dimensional precision across all production units for perfect fitment with mating chassis and suspension components.
The plate undergoes rigorous quality verification, including dimensional inspection, contour profile measurement, and material certification to guarantee its performance in demanding chassis locating and load distribution applications.
The material selection for the 81.61851.0008 plate prioritizes both high yield strength for load-bearing capacity and excellent formability to achieve the precise concave contour required for proper component positioning.
The 81.61851.0008 plate’s design has been validated through extensive load testing and vehicle durability trials to ensure it meets the highest quality standards for commercial vehicle precision structural components worldwide.
Replacement of the 81.61851.0008 concave plate involves disassembling the connected components, removing the old plate, cleaning all mating surfaces thoroughly, and positioning the new plate with correct orientation before reassembly.
After installation of the 81.61851.0008 plate, verify that it sits correctly within the assembly and that all connected components are properly aligned before final tightening of fasteners to manufacturer-specified torque values.
Regular inspection of the 81.61851.0008 plate for deformation, corrosion, or surface damage is recommended as part of routine chassis and suspension system inspections during scheduled preventive maintenance intervals.
When installing the 81.61851.0008 plate, it is essential to ensure correct orientation of the concave contour relative to mating components and to follow the manufacturer’s specified assembly sequence for optimal positioning.
It is also recommended to inspect mating components and mounting surfaces when replacing the 81.61851.0008 plate to ensure all interfaces are clean, flat, and free from damage that could affect proper component positioning.
During inspection, pay special attention to the concave contour profile and mounting hole areas of the 81.61851.0008 plate for signs of deformation, elongation, or surface degradation that indicate the need for replacement.
Each 81.61851.0008 concave plate undergoes comprehensive dimensional inspection, contour profile verification, and material quality testing to ensure it meets OEM specifications without any deviation from engineering design standards.
We provide full quality documentation for every 81.61851.0008 plate, including material certifications and inspection reports to satisfy fleet maintenance documentation and vehicle repair shop quality assurance requirements.
The plate is tested for dimensional accuracy and contour profile consistency to verify its ability to properly locate and position mating components under the maximum rated assembly loads specified by the vehicle manufacturer.
Our quality control process includes precision measurement of the 81.61851.0008 plate concave contour and mounting features to ensure proper fitment with mating components and reliable long-term locating performance.
We maintain full traceability of all materials used in the 81.61851.0008 plate, from raw steel certification to finished precision component, ensuring complete accountability throughout the entire manufacturing supply chain process.
Visible deformation, flattening, or loss of the concave contour on the 81.61851.0008 plate indicates mechanical overload and requires immediate replacement to restore proper component locating and positioning function.
Severe corrosion that has caused material thinning or surface degradation of the 81.61851.0008 plate also warrants replacement to prevent progressive deterioration and potential loss of locating accuracy during vehicle operation.
If the plate exhibits cracking, edge damage, or mounting hole elongation that affects its positioning function, the 81.61851.0008 plate should be replaced to ensure continued reliable component location and load distribution.
Following any chassis impact, collision damage, or component failure in the plate area, the 81.61851.0008 plate should be thoroughly inspected for hidden damage and replaced if any deformation or surface degradation is detected.
If the plate shows signs of fretting damage, surface wear, or loss of concave contour profile that could compromise its locating accuracy, it should be replaced to ensure proper component alignment during assembly.
Routine commercial vehicle chassis and suspension inspections should include a detailed visual and dimensional examination of the 81.61851.0008 plate to identify potential issues before they compromise assembly integrity and component positioning.
Aftermarket concave plates with incorrect dimensional specifications or inferior material quality can lead to improper component positioning, uneven load distribution, and potential assembly failure. We supply only authentic components like the 81.61851.0008 built to exact OEM specifications.
The part number 81.61851.0008 is clearly marked for verification. Our international logistics network ensures secure protective packaging and prompt dispatch to any global destination with complete export documentation and customs clearance support.
All orders for 81.61851.0008 include comprehensive quality documentation, ensuring compliance with local import regulations and fleet maintenance record requirements in your country of vehicle operation.
We offer competitive pricing and reliable shipping options for the 81.61851.0008 plate, making it convenient for our global customers to maintain their Shacman X5000 vehicle assemblies with proper OEM precision locating components.
Our dedicated customer service team is ready to assist with any technical or logistical questions regarding the 81.61851.0008 plate, from assembly consultations to bulk fleet order processing and international shipping coordination.
Complete 81.61851.0008 concave plate. Ready for professional installation with precision-formed concave contour and anti-corrosion treatment for long service life and reliable component positioning.
Expert guidance on assembly procedures and proper installation of the 81.61851.0008 plate is available. We help ensure proper component positioning for your Shacman X5000 vehicle.
Full quality documentation for 81.61851.0008 is available upon request, including material certifications and dimensional inspection reports for your permanent maintenance records.
For current stock availability of the genuine 81.61851.0008 concave plate, please use the contact buttons above.
